Re: onboard wireless on rpi4
Robert Crowston via freebsd-arm <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <EYvxKAScgQW0Nxfdxz4KPXZ-3OBfwdEsT2RIZSQqudyfb1n0Tr0kwHGlNER6mbloRqTK9vIaeAa0bIqUc_bU75Gab8uOuWgMBvQMzR810uw=@protonmail.com> |
Do you have a serial cable to get the console output? It would be handy to have the boot output. — RHC. ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Sunday, 6 September 2020 00:43, tech-lists <[email protected]> wrote: > On Sat, Sep 05, 2020 at 07:11:53PM +0100, tech-lists wrote: > > > On Sat, Sep 05, 2020 at 12:15:06PM +0000, Bjoern A. Zeeb wrote: > > > > > Two things which may help for the RPi/SDIO parts are: > > > > > > - please try and use MMCCAM kernels and help, test, debug, report, .. > > > all the things you find so (other people) can jump in as well so we can > > > switch that on as default. Without that, no SDIO. > > > > > > > Sure, it'll be the next thing i build on rpi4 after it's finished portmaster. > > Will you need a dmesg posted somewhere? > > Have to admit i've never built MMCCAM kernel before for rpi 1,2b+ or 3b+. > > What's significant about it? > > GENERIC-MMCCAM built and installed without error but breaks to ddb when the > kernel tries to load [1] I can see it by attaching a screen to HDMI. I have an FTDI usb serial device converter (built into the serial cable) is there any way i can grab output from there? or is the output written somewhere on the card where I can look at it? > > [1] in other words it passes the u-boot phase, gets past where it detects cpu, > then loads of errors zoom off the screen nd then ddb> prompt > -- > J. _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-arm To unsubscribe, send any mail to "[email protected]"