Re: BBB boot failure between r366365 and r366386
Oskar Holmlund via freebsd-arm <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <[email protected]> |
Hello Ed, > Den onsdag 7 oktober 2020 03:11:55 CEST, Ed Maste <[email protected]> skrev: > On Tue, 6 Oct 2020 at 14:59, Ed Maste <[email protected]> wrote: > > > > On Mon, 5 Oct 2020 at 15:56, Ed Maste <[email protected]> wrote: > > > > > > On Mon, 5 Oct 2020 at 09:53, Ed Maste <[email protected]> wrote: > > > > > > > > Sometime after r366365 and up to r366365 BBB stopped booting in the HW > > > > test environment. > > > > > > That should of course be after r366365 and up to (and including) > > > r366386. > > > > Discussed on IRC; the second U-Boot banner comes out ~60s after the > > first, which might suggest a watchdog timeout. > > > > We seem to get stuck after > > > random: unblocking device. > > kevans points out that std.armv7 includes VERBOSE_SYSINIT=0, so > verbose sysinits are available with a loader tunable. We get this far: > > subsystem 2140000 > init_hwpmc(0)... done. > init_dtrace(0)... done. > pmc_soft_ev_register(&pmc___lock_failed)... done. > pmc_soft_ev_register(&pmc___clock_prof)... done. > pmc_soft_ev_register(&pmc___clock_hard)... done. > pmc_soft_ev_register(&pmc___clock_stat)... done. > subsystem 2160000 > random_fortuna_init_alg(0)... done. > random_harvestq_init(0)... done. > random_harvestq_prime(0)... done. > __stack_chk_init(0)... random: unblocking device. > done. > subsystem 2180000 > mac_init(0)... done. > subsystem 21d0000 > mac_late_init(0)... done. > subsystem 21e0000 > vnet0_init(0)... done. > subsystem 2200000 > proc0_init(0)... done. > shutdown_conf(0)... done. > subsystem 2300000 > vm_stats_init(0)... done. > uma_startup3(0)... done. > vm_page_init_cache_zones(0)... done. > subsystem 2380000 > db_capture_sysinit(0)... done. > subsystem 2400000 > sched_setup(0)... done. > subsystem 2480000 > ktrace_init(0)... > _______________________________________________ > [email protected] mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "[email protected]" I can not reproduce the problem - I have tested r366366 - r366386 and as of today r366515 and all works fine. U-boot is same as yours 2020.07. But i have not tested to netboot the BBB, i have only tested from SD card and from eMMC. I can try the kernel and base from the CI builds later. //Oskar _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-arm To unsubscribe, send any mail to "[email protected]"