Re: RPi4B: emmc2bus dma-range handling does not track the boot-time-FDT (u-boot based booting)

On Thu, Oct 8, 2020 at 9:18 PM bob prohaska <[email protected]> wrote:
>
> On Thu, Oct 08, 2020 at 01:34:12PM -0500, Kyle Evans wrote:
> >
> > Here's a patch that I hacked out and can't test for quite a while yet,
> > feel free to give it a shot:
> > https://people.freebsd.org/~kevans/bcm2835_vcbus.diff  -- the best
> > guarantee I can give you is that it builds. We'll need to test it on
> > both RPi4 models with the separate bus and the original RPi4s, as well
> > as an RPi3 and RPi2/0w.
> >
>
> FWIW, a Pi3B running
> FreeBSD www.zefox.org 13.0-CURRENT FreeBSD 13.0-CURRENT #0 r366466M: Thu Oct  8 17:18:55 PDT 2020     [email protected]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC  arm64
>
> seems to build, boot and run without immediate problems.
>
> A Pi2 running
> FreeBSD www.zefox.com 13.0-CURRENT FreeBSD 13.0-CURRENT #2 r365692: Thu Oct  8 16:57:50 PDT 2020     [email protected]:/usr/obj/usr/src/arm.armv7/sys/GENERIC-MMCCAM  arm
>
> also built, booted and ran.
>
> Uptime so far is only a few minutes, but so far, so good. If the MMCCAM
> mismatch is significant let me know and I'll fix it.
>

Thanks for testing!

Can you also confirm the output of `dmesg | grep 'WARNING:'`, please?
In particular, I'd like to know if you hit either of:

WARNING: Improper peripheral attachment ...
WARNING: bus for '...' missing dma-ranges

MMCAM is fine; by the time you've gone multi-user it's definitely
exercised the appropriate bits.

Thanks,

Kyle Evans
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-arm
To unsubscribe, send any mail to "[email protected]"