Re: RPi4B: emmc2bus dma-range handling does not track the boot-time-FDT (u-boot based booting)
Klaus Cucinauomo via freebsd-arm <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <[email protected]> |
> Am 10.10.2020 um 02:39 schrieb Mark Millard <[email protected]>: > …… > ... > No use is made of FreeBSD’s sys/gnu/dts/arm64/broadcom/ by this technique. > Seems to be unclear(at least to me), whether ever used or never ...while absolutely possible that you`re right here. ` have discussed that with Rob Crowston & Mike Karels some time ago, The problem was the bcm2711-rpi-4-b.dtb , which at that time shouldn’t be changed because to stay compatible with the 8GB-model., so possibly since then there never was a newer dts compiled to dtb. But I G U E S S(still can’t resist;-) that we now have to patch&compile( at least bcm2711-rpi-4-b) to stay in touch with 2020.10 > Am 10.10.2020 um 02:21 schrieb Mark Millard <[email protected]>: > My FreeBSD USB3 SSD is partitioned as:…….. > After that it tries to boot from ethernet (which was > not connected). Tomorrow I will look again exactly with which partition tables I booted the SSD, for today I am completely dizzy from all that rpi-dtb stuff , I can’t remember what I did :-) _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-arm To unsubscribe, send any mail to "[email protected]"