Re: RPi4B: modern firmware vs. Device tree loaded to 0x4000 (size 0xbe0c) [fails] vs. to 0x1f0000 (size 0xbd90) [works]?
Klaus Cucinauomo via freebsd-arm <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <[email protected]> |
> Am 11.10.2020 um 15:38 schrieb Robert Crowston <[email protected]>: > > (I have not tried updating u-boot yet.) … All I did was remove the device_tree_address=0x4000 from config.txt. In boot 2020.10 the whole armstubs-stuff should or has to be removed when using modern firmware so ….MESS:00:00:08.221028:0: Loading ‚armstub8-gic.bin' to 0x0 size 0x1700... will result in a hdmi-rainbow - screen - hang ( or console-hang)(`ve tested it with your removed device_tree_address=0x4000 also(still hangs)) If you want to test I`ve uploaded the u-boot2020.10 to spare you some compile-time on your nice weekend ;-) : https://wiki.freebsd.org/arm/Raspberry%20Pi#RPI4 (Best to test directly boot from SSD because that’s the purpose to upgrade u-boot) Regards K. _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-arm To unsubscribe, send any mail to "[email protected]"