Re: RPi4B: modern firmware vs. Device tree loaded to 0x4000 (size 0xbe0c) [fails] vs. to 0x1f0000 (size 0xbd90) [works]?
Klaus Cucinauomo via freebsd-arm <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <[email protected]> |
> Am 12.10.2020 um 01:13 schrieb Robert Crowston <[email protected]>: > ... >>> mmc0 is current device >> >> should not be mmc0 if you boot from USB/SSD > > I'm still using sd cards. > ... > > — RHC. The one and only pcie-BOSS itself is forced by armstubs to boot from a poor 10Mb/sWrite SD-card-fingernail… This terrible misery must end. ;-) Ha Ha, …... that’s why we want to use the xhci-boot feature of 2020.10 Regards K. — ... PCIe BRCM: link up, 5.0 Gbps x1 (SSC) starting USB... …. Device 0: Vendor: JMicron Rev: 3202 Prod: Tech Type: Hard Disk Capacity: 114473.4 MB = 111.7 GB (234441648 x 512) ... is now current device Scanning usb 0:1... Found EFI removable media binary efi/boot/bootaa64.efi … — _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-arm To unsubscribe, send any mail to "[email protected]"