Re: FreeBSD/RockPro64 experience
Milan Obuch <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <[email protected]> |
On Sat, 7 Nov 2020 12:44:26 +0100, Henri Hennebert <[email protected]> wrote: > On 11/7/20 11:57 AM, Milan Obuch wrote: > > Hi, > > > > today I had an opportunity to check $subject configuration for a > > while. I downloaded from ftp.freebsd.org file I put on uSD card - > > FreeBSD-13.0-CURRENT-arm64-aarch64-ROCKPRO64-20201029-b9403d7aae8.img > > > > Using serial console, I was able to see the whole boot process, just > > one small observation - at the beginning, there is short notice from > > BL31: > > > > NOTICE: BL31: v2.3(): > > NOTICE: BL31: Built : 06:52:32, Oct 29 2020 > > > > which is sent over wire at 115200 bps (or 115.2 kpbs if you prefer), > > then speed is switched to 1500000 bps (or 1.5 Mbps, put the other > > way). > > To solve this I add this file in > /usr/ports/sysutils/u-boot-master/files > > cat patch-configs_rockpro64-rk3399_defconfig > --- configs/rockpro64-rk3399_defconfig 2020-04-13 > 17:02:18.000000000 +0200 +++ > configs/rockpro64-rk3399_defconfig.orig 2020-04-27 > 15:39:12.866611000 +0200 @@ -52,7 +52,7 @@ CONFIG_PWM_ROCKCHIP=y > CONFIG_RAM_RK3399_LPDDR4=y > CONFIG_DM_RESET=y > -CONFIG_BAUDRATE=1500000 > +CONFIG_BAUDRATE=115200 > CONFIG_DEBUG_UART_SHIFT=2 > CONFIG_ROCKCHIP_SPI=y > CONFIG_SYSRESET=y > > And rebuild /usr/ports/sysutils/u-boot-rockpro64 > > Henri > I did not investigate more as I can not test it any longer, but proposed solution is good for me. Regards, Milan _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-arm To unsubscribe, send any mail to "[email protected]"