Re: RPi4b 8GB 13.0-Current, XHCI broken, wrong U-Boot ?
Klaus Küchemann via freebsd-arm <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <[email protected]> |
> Am 03.01.2021 um 11:57 schrieb Emmanuel Vadot <[email protected]>: > > > Check the RPI image > (https://download.freebsd.org/ftp/snapshots/ISO-IMAGES/13.0/FreeBSD-13.0-CURRENT-arm64-aarch64-RPI-20201224-3cc0c0d66a0-255241.img.xz) I did and now I’m sure that you don’t own an RPI4-8GB(because the image doesn’t boot from USB/SSD).. But the good news is that you have everything done well in „organizing“ the firmware-port. With this last image the start4.elf & fixup4.dat is fine ! So:good work. So it’s all about : https://reviews.freebsd.org/D26853 which fixes pcie/usb-bootup-firmware-issues.( tested by me & Andy for now). > Am 03.01.2021 um 11:57 schrieb Emmanuel Vadot <[email protected]>: >> So the question is WHICH files should differ from sysutils/rpi-firmware. > > None. it’s bcm2711-rpi-4-b.dtb which(currently) has to differ if we want to boot straight up from USB/SSD . I say `currently` because that could change upstream. But why struggle with upstream if we can fix it ourselves? > Am 03.01.2021 um 12:43 schrieb Andy McClements <[email protected]>: > > ….. > I am happy to say that, WITH PATCH D26853, all of these will successfully allow FreeBSD 20201224 to boot from USB SSD. Also that the vanilla 20201224 img (which I have checked includes the 20201201 firmware) also works fine, WITH PATCH D26853. > …. That’s awesome news, Andy and many many thanks for all your extensive tests ! So we can probably say that currently we don’t have to struggle with different silicon-version, very good news. And while #0XJTAG-Boss Rob privately is booting from a poor uSD-fingernail himself, the nicest present he gave us is the USB/SSD-bootup ;-) , superf**king fast, 10 times faster(measured) than uSD, great! Regards K. _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-arm To unsubscribe, send any mail to "[email protected]"