Re: RPi4b 8GB 13.0-Current, XHCI broken, wrong U-Boot ?
Andy McClements <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <[email protected]> |
On 03/01/2021 18:29, Andy McClements wrote: > Further on this, I have just done another test by replacing only: > > bcm2711-rpi-4-b.dtb > > on the FreeBSD 13.0-CURRENT 20201224 img, with the one from the RPI > firmware 20201227 release. > > This **allows booting from USB**, which fails on the stock 20201224 img. > > So it seems to me that patch D26853 **is not required**, if the upstream > file is now working OK. ************************* * A P O L O G I E S ! * ************************* I have just noticed that with the 20201227 firmware version of 'bcm2711-rpi-4-b.dtb', 'genet0' is missing. USB disk boot is fine, but the onboard GE is not recognised. The only way I can get everything working on my RPi4b 8G with FreeBSD 20201224, is to use the D26853 patched version of 'bcm2711-rpi-4-b.dtb'. The firmware version I've been referring to as 20201227, has files in it with that datestamp, and was obtained from: https://github.com/raspberrypi/firmware/archive/master.zip _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-arm To unsubscribe, send any mail to "[email protected]"