Getting RPi4b (8GB) to boot from a microSD card?
Torfinn Ingolfsen <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <[email protected]> |
Is there a trick to getting a Pi4B (8 GB) to boot FreeBSD from a microSD card? So far I have tried FreeBSD-13.0-ALPHA1-arm64-aarch64-RPI-20210114-7ae27c2d6c4-255938.img.xz - prints some text on the screen, then starts over, endless cycle FreeBSD-12.2-STABLE-arm64-aarch64-RPI3-20210114-r369008.img.xz - with updated firmware from https://github.com/raspberrypi/firmware/raw/master/boot/ - boots, loads kernel, then stops with "gpioregulator0: cannot get pin 0" as the last line before kernel fault FreeBSD-12.2-RELEASE-arm64-aarch64-RPI3.img.xz - with updated firmware from https://github.com/raspberrypi/firmware/raw/master/boot/ - boots, loads kernel, then stops with "gpioregulator0: cannot get pin 0" as the last line before kernel fault Or is it just a case of cherrypicking a working image? -- Torfinn Ingolfsen <[email protected]> _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-arm To unsubscribe, send any mail to "[email protected]"