Re: GENERICSD snapshot on a BBB has issues with loading the if_rtwn_usb module

> Am 17.01.2021 um 13:45 schrieb Emmanuel Vadot <[email protected]>:
> 
> On Sat, 16 Jan 2021 15:11:28 -0300
> "Dr. Rolf Jansen" <[email protected] <mailto:[email protected]>> wrote:
> 
>>> Am 16.01.2021 um 14:48 schrieb Emmanuel Vadot <[email protected] <mailto:[email protected]>>:
>>> 
>>> On Sat, 16 Jan 2021 18:43:33 +0100
>>> Emmanuel Vadot <[email protected] <mailto:[email protected]> <mailto:[email protected] <mailto:[email protected]>>> wrote:
>>> 
>>>> On Sat, 16 Jan 2021 14:08:58 -0300
>>>> "Dr. Rolf Jansen" <[email protected]> wrote:
>>>> 
>>>>> I updated one of my BBB from an older 13-CURRENT (July 2020) to the latest 13-ALPHA1 snapshot from Jan, 14th ? GENERICSD-20210114-7ae27c2d6c4-255938.
>>>>> 
>>>>> I had successfully employed an USB-WLAN dongle based on the RTL8188eu chipset. I only added the following into /boot/loader.conf:
>>>>> 
>>>>> if_rtwn_usb_load="YES"
>>>>> 
>>>>> By that all dependend modules were loaded automatically in a snap. With ALPHA1 this doesn?t work anymore. After hours of troubleshooting, I got it working by adding the following into /etc/rc.conf:
>>>>> 
>>>>> kld_list="if_rtwn_usb"
>>>>> 
>>>>> The "Loading kernel modules:" takes apprx. 4 seconds, however, then the USB-WLAN device is enumerated correctly and it is ready to use. This makes me think that this uncommon huge delay is the culprit. I checked this with some snapshot thats I had installed already. The issue seems to have been introduced together with the switch to GENERICSD. A GENERICSD 13-CURRENT from end of December showed this issue already, while a BBB-specific snapshot (from November 2020) that I had installed on another BBB works as before by loading the modules in /boot/loader.conf.
>>>>> 
>>>>> I don't mind to load the modules by the way of the kld_list directive in /etc/rc.conf. However, the unusual long duration of loading the module and its dependencies might be an indication for a more fundamental issue.
>>>>> 
>>>>> Please feel free to ask me for doing more tests. 
>>>>> 
>>>>> Best regards
>>>>> 
>>>>> Rolf
>>>> 
>>>> I can reproduce that on my netbooted BBB.
>>>> The module is correctly loaded :
>>>> 
>>>> Loading
>>>> kernel... /boot/kernel/kernel text=0x1b4 text=0x68d638 text=0x1c84f0
>>>> data=0xb4070 data=0x0+0x258000 syms=[0x4+0xa5ab0+0x4+0x119fd4] Loading
>>>> configured modules... /boot/kernel/if_rtwn_usb.ko text=0xb960
>>>> text=0x62c0 data=0x2cc+0x3b syms=[0x4+0x3570+0x4+0x293f] /boot/entropy
>>>> size=0x1000 /etc/hostid
>>>> size=0x25 Using DTB provided by EFI at
>>>> 0x87f00000. Kernel entry at
>>>> 0x96e00200... Kernel args:
>>>> (null)                                                                                                 
>>>> ---<<BOOT>>---                                                                                         
>>>> 
>>>> But it isn't loaded anymore after booting :
>>>> root@bbb:~ # kldstat 
>>>> Id Refs Address        Size Name
>>>> 1    1 0xc0000000   d23a8c kernel
>>>> 
>>>> I don't think it has to do with the switch to GENERICSD, there is (at
>>>> least shouldn't be) any difference between the old BBB image and the
>>>> GENERICSD one.
>> 
>> Yes, this might well be a coincidence. I do neither have the last BBB specific snapshot nor the first GENERICSD one for testing these against each other.
>> 
>>> Just did a test on my OrangePi One (Allwinner H3 armv7 with 512MB of
>>> RAM) and this is the same.
>>> The problem seems to be module dependancy, loader only loads
>>> if_rtnw_usb but doing a kldload also brings wlan.ko and rtwn.ko
>> 
>> I can confirm this. And in addition loading the if_rtwn_usb.ko module and its dependcies manually also takes now significantly longer compared to a manual load on the BBB specific 13-CURRENT from November. Perhaps something has been changed in the dependency resolver.
>> 
> 
> Fixed in 0f2434ea000e
> 
> Thanks for reporting.

Unfortunately, this did not resolve the issue. I updated my working copy with git pull and verified that your changes made it into my source tree. Then I built a new kernel and replaced the original ALPHA1 kernel from 2021-01-14 by this new one. The rtwn-modules are still not loaded by the if_rtwn_usb_load="YES" directive in /boot/loader.conf.

Best regards

Rolf
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-arm
To unsubscribe, send any mail to "[email protected]"