Armada 7k8k & U-Boot/Device Tree
Marcin Wojtas <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <CAPv3WKeBrbk7HtXYs07c_SZEU051VovhNTAtbLoOmLe41Qj-cA@mail.gmail.com> |
Hi, I struggled a bit with Armada 7k8k with FreeBSD and U-Boot (more general - FreeBSD and device tree) - the experience is not pleasant, but unfortunately in this activity switching to EDK2 firmware is not an opiton. On top of HEAD I see following issues (checked on MacchiatoBin, Armada 7040 DB, Armada 8040 DB and a custom board). Device tree used is aligned with Linux v5.10's. - PCIE init hang on MacchiatoBin (it has to be disabled to proceed) - CP110 interfaces do cannot operate - the devices such as SD/MMC and USB time out. KDB shows that no IRQs are received in GIC via ICU-GICP secondary controllers. Does anyone use MacchiatoBin with U-Boot (and/or Device Tree) and see similar issues? Was there a pair of FreeBSD - device tree revisions that fully worked? Best regards, Marcin _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-arm To unsubscribe, send any mail to "[email protected]"