Re: rpi4 network boot
Klaus Küchemann via freebsd-arm <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <[email protected]> |
> Am 06.02.2021 um 21:27 schrieb Matthew Grooms <[email protected]>: > > I need to netboot without the help of local storage or human intervention. > this would be possible by flashing&configuring the eeprom to pxe-boot- capability (which isn’t the default afaik) . > Am 07.02.2021 um 02:41 schrieb Matthew Grooms <[email protected]>: > > > /etc/exports: > /var/rpi4/netboot -ro -alldirs -maproot=root why '-ro‘ ?? > Am 07.02.2021 um 02:41 schrieb Matthew Grooms <[email protected]>: > /usr/local/etc/dhcpd.conf….. option root-path „X.X.X.25:/var/rpi4/netboot/freebsd“ ;…… while it seems to boot in your case "/var/rpi4/netboot/freebsd/“ is not the same as the above "/var/rpi4/netboot“ > Am 05.01.2021 um 01:18 schrieb Matthew Grooms <[email protected]>: >> >> >> root@rpi4:/var/rpi4/netboot/firmware-master # ls -la and why did you split the folders under ../netboot/..? > Am 07.02.2021 um 02:41 schrieb Matthew Grooms <[email protected]>: > …… > . > starting USB… > No working controllers found > Hit any key to stop autoboot: 2 1 0 > Card did not respond to voltage select! > starting USB... > No working controllers found > USB is stopped. Please issue 'usb start' first. > starting USB... > No working controllers found Would far be better if you had access to your keyboard from the 1st moment of boot(it`s possible!!) hint : https://sourceforge.net/projects/d26853-bcm2711-rpi-4-b-dtb/ I don`t want to discuss this no more here :-) Ha Ha .. What’s your output of : root@matthew:~# sockstat -l4 and root@matthew:~# cat /etc/fstab ? Regards K. _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-arm To unsubscribe, send any mail to "[email protected]"