Re: newfs segfault (was:nvme dma returns EFBIG (27))
Jesper Schmitz Mouridsen <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <[email protected]> |
On 11.02.2021 14.22, Jesper Schmitz Mouridsen wrote: > On 11.02.2021 04.13, Mark Millard wrote: >> On 2021-Feb-10, at 15:01, Jesper Schmitz Mouridsen <jsm at >> FreeBSD.org> wrote: >> >>> On 10.02.2021 23.08, Emmanuel Vadot wrote: >>>> On Wed, 10 Feb 2021 22:55:27 +0100 >>>> Jesper Schmitz Mouridsen <[email protected]> wrote: >>>> >>>>> Hi >>>>> >>>>> I can dd blocks from /dev/nda0p0 but I cannot run newfs. >>>>> >>>>> It prints nvme0: nvme_payload_map: err 27. and ctrl+t shows it is >>>>> stuck in physwri >>>>> >>>>> https://github.com/freebsd/freebsd-src/blob/a6dc68c0e0f8a24ffaf0b4e78e58141ef7897047/sys/dev/nvme/nvme_qpair.c#L1003 >>>>> >>>>> >>>>> https://github.com/freebsd/freebsd-src/blob/c6c70c074633569447be4bfd2b694a1c294015bd/sys/dev/nvme/nvme_qpair.c#L567 >>>>> >>>>> >>>>> I could format as ext4 under Linux. >>>>> >>>>> Any hints or pointers are welcome. >>>>> >>>>> Thanks >>>>> >>>>> Jesper >>>> What board ? >>>> What version of FreeBSD ? >>>> dmesg ? >>>> >>>> Any of the above is *always* required for trying to reproduce and >>>> finding bugs. >>>> >>>> Cheers, >>>> >>> I was on FreeBSD generic 13.0-ALPHA1 on >>> >>> on FreeBSD generic 13.0-ALPHA2 FreeBSD 13.0-ALPHA2 #0 >>> c256201-g02611ef8ee9 >>> >>> newfs /dev/nda0p1v now core dumps. >>> >>> Program terminated with signal SIGSEGV, Segmentation fault. >>> #0 isblock (cp=0x100247f9f <error: Cannot access memory at address >>> 0x100247f9f>, h=0, fs=<optimized out>) at >>> /usr/src/sbin/newfs/mkfs.c:1085 >>> 1085 /usr/src/sbin/newfs/mkfs.c: No such file or directory. >>> (gdb) bt >>> #0 isblock (cp=0x100247f9f <error: Cannot access memory at address >>> 0x100247f9f>, h=0, fs=<optimized out>) at >>> /usr/src/sbin/newfs/mkfs.c:1085 >>> #1 alloc (size=4096, mode=mode@entry=16893) at >>> /usr/src/sbin/newfs/mkfs.c:1001 >>> #2 0x0000000000215d20 in fsinit (utime=<optimized out>) at >>> /usr/src/sbin/newfs/mkfs.c:948 >>> #3 mkfs (pp=<optimized out>, pp@entry=0x0, fsys=<optimized out>, >>> fsys@entry=0xffffffffee26 "/dev/nda0p1") at >>> /usr/src/sbin/newfs/mkfs.c:611 >>> #4 0x00000000002133ec in main (argc=<optimized out>, >>> argv=<optimized out>) at /usr/src/sbin/newfs/newfs.c:405 >>> >>> It is on my pinebookpro. nvmecontrol devlist >>> nvme0: KINGSTON SA2000M8250G >>> nvme0ns1 (238475MB) >> Care to try somehting like . . . >> >> # gdb newfs >> . . . >> Reading symbols from newfs... >> Reading symbols from /usr/lib/debug//sbin/newfs.debug... >> (gdb) start /dev/nda0p1v >> Temporary breakpoint 1 at 0x2129f8: file >> /usr/fbsd/mm-src/sbin/newfs/newfs.c, line 142. >> . . . >> Temporary breakpoint 1, main (argc=1, argv=0xffffffffeb80) at >> /usr/fbsd/mm-src/sbin/newfs/newfs.c:142 >> 142 reserved = 0; >> (gdb) print &disk.d_sbunion.d_fs >> ??? >> (gdb) print (&disk.d_sbunion.d_fs)+1 >> ??? >> >> I'm curious about the ??? figures reports vs. the 0x100247f9f >> in your backtrace. (Not that I'm sure what to do with the >> reported information.) The start causes some libraries to >> load, which is why I indicated to use it. > Below gdb output and nvmecontrol identify nvme0 > > > Type "apropos word" to search for commands related to "word"... > > Reading symbols from newfs... > Reading symbols from /usr/lib/debug//sbin/newfs.debug... > (gdb) b newfs.c:142 > Breakpoint 1 at 0x2129d8: file /usr/src/sbin/newfs/newfs.c, line 142. > (gdb) c > The program is not being run. > (gdb) start /dev/nda0p1 > Temporary breakpoint 2 at 0x2129d8: file /usr/src/sbin/newfs/newfs.c, > line 142. > Starting program: /sbin/newfs /dev/nda0p1 > > Breakpoint 1, main (argc=2, argv=0xffffffffea60) > at /usr/src/sbin/newfs/newfs.c:142 > warning: Source file is more recent than executable. > 142 reserved = 0; > (gdb) print &disk.d_sbunion.d_fs > $1 = (struct fs *) 0x237fa0 <disk+64> > (gdb) print (&disk.d_sbunion.d_fs)+1 > > $2 = (struct fs *) 0x238500 <disk+1440> > > nvmecontrol identify nvme0 > Controller Capabilities/Features > ================================ > Vendor ID: 2646 > Subsystem Vendor ID: 2646 > Serial Number: > Model Number: KINGSTON SA2000M8250G > Firmware Version: S5Z42105 > Recommended Arb Burst: 6 > IEEE OUI Identifier: b7 26 00 > Multi-Path I/O Capabilities: Not Supported > Max Data Transfer Size: 131072 bytes > Controller ID: 0x0001 > Version: 1.3.0 > > Admin Command Set Attributes > ============================ > Security Send/Receive: Supported > Format NVM: Supported > Firmware Activate/Download: Supported > Namespace Managment: Not Supported > Device Self-test: Supported > Directives: Not Supported > NVMe-MI Send/Receive: Not Supported > Virtualization Management: Not Supported > Doorbell Buffer Config: Not Supported > Get LBA Status: Not Supported > Sanitize: crypto, block, > Abort Command Limit: 5 > Async Event Request Limit: 8 > Number of Firmware Slots: 2 > Firmware Slot 1 Read-Only: No > Per-Namespace SMART Log: Yes > Error Log Page Entries: 256 > Number of Power States: 5 > Total NVM Capacity: 0 bytes > Unallocated NVM Capacity: 0 bytes > Firmware Update Granularity: 00 (Not Reported) > Host Buffer Preferred Size: 0 bytes > Host Buffer Minimum Size: 0 bytes > > NVM Command Set Attributes > ========================== > Submission Queue Entry Size > Max: 64 > Min: 64 > Completion Queue Entry Size > Max: 16 > Min: 16 > Number of Namespaces: 1 > Compare Command: Supported > Write Uncorrectable Command: Supported > Dataset Management Command: Supported > Write Zeroes Command: Supported > Save Features: Supported > Reservations: Not Supported > Timestamp feature: Supported > Verify feature: Not Supported > Fused Operation Support: Not Supported > Format NVM Attributes: Crypto Erase, Per-NS Erase, Per-NS Format > Volatile Write Cache: Present, flush all > > NVM Subsystem Name: (null) > _______________________________________________ > [email protected] mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "[email protected]" forgot kern.maxphys: 1048576 _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-arm To unsubscribe, send any mail to "[email protected]"