Re: Any good alternative to Raspberry for Arm64?
Søren Schmidt <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <[email protected]> |
On 28 Mar 2021, at 21.23, Daniel Engberg <[email protected]> wrote: > ESD can kill any type of hardware, there are multiple reasons why you shouldn't play around with live hardware and powered off for that matter without any protection regarding ESD. Pretty much all hardware comes with clear instructions and warnings about it. Without getting too technical I say that I have a 3A PSU the runs fine at least for me however quality of PSUs is a different story. It's a RockPro64 paired with a dual port PCIe NIC however I would recommend higher rated one if you plan to attach non external powered USB devices. > > We only support mainline u-boot, if you're using forks and/or patched versions you're kinda "on your own" and there's no (to my knowledge) support (yet) upstream for booting off NVME or SATA/AHCI. Well, at least u-boot2021.01 has all the needed support to boot a rockpro64 or pinebookpro from nvme/sata/usb/sd/mmc/net. If you put u-boot into the SPI-flash it will boot from any of the above media. -- Søren Schmidt [email protected] / [email protected] "So much code to hack, so little time" _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-arm To unsubscribe, send any mail to "[email protected]"