Re: /usr/local/share/u-boot/u-boot-orangepi-plus-2e/README out of date ; orangepi-plus-2e and RPi2 v1.1 get "Kernel args: (null)"
Emmanuel Vadot <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <[email protected]> |
On Thu, 13 May 2021 01:52:08 -0700 Mark Millard via freebsd-arm <[email protected]> wrote: > The updated armv7 U-Boot ports now install the likes of: > > # ls -Tldt /usr/local/share/u-boot/u-boot-orangepi-plus-2e/* > -rw-r--r-- 1 root wheel 504 May 12 07:01:10 2021 /usr/local/share/u-boot/u-boot-orangepi-plus-2e/README > -rw-r--r-- 1 root wheel 66 May 12 07:01:10 2021 /usr/local/share/u-boot/u-boot-orangepi-plus-2e/metadata > -rw-r--r-- 1 root wheel 490924 May 12 07:01:10 2021 /usr/local/share/u-boot/u-boot-orangepi-plus-2e/u-boot-sunxi-with-spl.bin > > # ls -Tldt /usr/local/share/u-boot/u-boot-rpi2/* > -rw-r--r-- 1 root wheel 767 May 12 06:39:07 2021 /usr/local/share/u-boot/u-boot-rpi2/README > -rw-r--r-- 1 root wheel 44 May 12 06:39:07 2021 /usr/local/share/u-boot/u-boot-rpi2/metadata > -rw-r--r-- 1 root wheel 475420 May 12 06:39:07 2021 /usr/local/share/u-boot/u-boot-rpi2/u-boot.bin > > So, for example, no boot.scr files ro go with ubldr.bin > any more. > > But the u-boot-orangepi-plus-2e/README says . . . > > QUOTE > This version is patched so that: > * API features are enabled. > * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included > END QUOTE > > The u-boot-rpi2/README says . . . > > QUOTE > This version is patched so that: > * ELF and API features are enabled. > * The distroboot command knows how to load FreeBSD loader(8) > * By default, it loads ubldr.bin (PIE) from file ubldr.bin on the FAT > partition to address ${kernel_addr_r}, and launches it. If ubldr.bin is > not found, it falls back on ubldr > END QUOTE > Oups, I'll update the README, thanks for noticing this. > But for the orangepi-plus-2e that I have access to I > now get: > > . . . > Hit [Enter] to boot immediately, or any other key for command prompt. > Booting [/boot/kernel/kernel]... > Using DTB provided by EFI at 0x47eea000. > Kernel entry at 0xb2e00200... > Kernel args: (null) This is the symptoms when caches are not flushed. U-Boot distroboot first scans for extlinux.conf, then uboot script and then EFI. So this probably means that you still have a boot.scr on the ESP, try removing that and make sure that you have the efi loader too in efi/boot/bootarm.efi. > and that is the last of the output. > > The RPi2 v1.1 is similar: > > Hit [Enter] to boot immediately, or any other key for command prompt. > Booting [/boot/kernel/kernel]... > Using DTB provided by EFI at 0x7ef6000. > Kernel entry at 0x33e00200... > Kernel args: (null) > > and that is the last of the output. > > > === > Mark Millard > marklmi at yahoo.com > ( dsl-only.net went > away in early 2018-Mar) > > _______________________________________________ > [email protected] mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "[email protected]" -- Emmanuel Vadot <[email protected]> <[email protected]> _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-arm To unsubscribe, send any mail to "[email protected]"