Re: /usr/local/share/u-boot/u-boot-orangepi-plus-2e/README out of date ; orangepi-plus-2e and RPi2 v1.1 get "Kernel args: (null)"
Emmanuel Vadot <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <[email protected]> |
On Thu, 13 May 2021 02:57:21 -0700 Mark Millard <[email protected]> wrote: > > On 2021-May-13, at 02:15, Emmanuel Vadot <manu at bidouilliste.com> wrote: > > > > On Thu, 13 May 2021 01:52:08 -0700 > > Mark Millard via freebsd-arm <[email protected]> wrote: > > > >> The updated armv7 U-Boot ports now install the likes of: > >> > >> # ls -Tldt /usr/local/share/u-boot/u-boot-orangepi-plus-2e/* > >> -rw-r--r-- 1 root wheel 504 May 12 07:01:10 2021 /usr/local/share/u-boot/u-boot-orangepi-plus-2e/README > >> -rw-r--r-- 1 root wheel 66 May 12 07:01:10 2021 /usr/local/share/u-boot/u-boot-orangepi-plus-2e/metadata > >> -rw-r--r-- 1 root wheel 490924 May 12 07:01:10 2021 /usr/local/share/u-boot/u-boot-orangepi-plus-2e/u-boot-sunxi-with-spl.bin > >> > >> # ls -Tldt /usr/local/share/u-boot/u-boot-rpi2/* > >> -rw-r--r-- 1 root wheel 767 May 12 06:39:07 2021 /usr/local/share/u-boot/u-boot-rpi2/README > >> -rw-r--r-- 1 root wheel 44 May 12 06:39:07 2021 /usr/local/share/u-boot/u-boot-rpi2/metadata > >> -rw-r--r-- 1 root wheel 475420 May 12 06:39:07 2021 /usr/local/share/u-boot/u-boot-rpi2/u-boot.bin > >> > >> So, for example, no boot.scr files ro go with ubldr.bin > >> any more. > >> > >> But the u-boot-orangepi-plus-2e/README says . . . > >> > >> QUOTE > >> This version is patched so that: > >> * API features are enabled. > >> * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included > >> END QUOTE > >> > >> The u-boot-rpi2/README says . . . > >> > >> QUOTE > >> This version is patched so that: > >> * ELF and API features are enabled. > >> * The distroboot command knows how to load FreeBSD loader(8) > >> * By default, it loads ubldr.bin (PIE) from file ubldr.bin on the FAT > >> partition to address ${kernel_addr_r}, and launches it. If ubldr.bin is > >> not found, it falls back on ubldr > >> END QUOTE > >> > > > > Oups, I'll update the README, thanks for noticing this. > > FYI: I only looked at examples for which I've access > to operational hardware. > > >> But for the orangepi-plus-2e that I have access to I > >> now get: > >> > >> . . . > >> Hit [Enter] to boot immediately, or any other key for command prompt. > >> Booting [/boot/kernel/kernel]... > >> Using DTB provided by EFI at 0x47eea000. > >> Kernel entry at 0xb2e00200... > >> Kernel args: (null) > > > > This is the symptoms when caches are not flushed. > > U-Boot distroboot first scans for extlinux.conf, then uboot script and > > then EFI. So this probably means that you still have a boot.scr on the > > ESP, try removing that and make sure that you have the efi loader too > > in efi/boot/bootarm.efi. > > That is not the issue . . . showing more context > from the same recorded boot attempts (blank lines > and a huge number of escape sequences removed, and > using ". . ." for other omitted text): > > U-Boot 2021.04 (Apr 09 2021 - 19:24:51 +0000) Allwinner Technology > CPU: Allwinner H3 (SUN8I 1680) > Model: Xunlong Orange Pi Plus 2E > DRAM: 2 GiB > . . . > FreeBSD/arm EFI loader, Revision 1.1 > Command line arguments: l > Image base: 0xb8dd5000 > EFI version: 2.80 > EFI Firmware: Das U-Boot (rev 8225.1024) > Console: comconsole (0) > Load Path: /efi\boot\bootarm.efi > . . . > Found EFI removable media binary efi/boot/bootarm.efi > 1396100 bytes read in 36 ms (37 MiB/s) > Booting /efi\boot\bootarm.efi > Consoles: EFI console > |/-\|/-\|/-\|/-\|/-\|/-\|/-\ Reading loader env vars from /efi/freebsd/loader.env > . . . > Hit [Enter] to boot immediately, or any other key for command prompt. > Booting [/boot/kernel/kernel]... > Using DTB provided by EFI at 0x47eea000. > Kernel entry at 0xb2e00200... > Kernel args: (null) I cannot reproduce this here. Either by creating an image on the sdcard by hand (I usually only netboot my boards so the sdcard have only u-boot and a fat partition so u-boot can save its env) or by taking FreeBSD-13.0-RELEASE-arm-armv7-GENERICSD.img and adding u-boot on it. This was tested on an orangepi-one board (so same SoC, Allwinner H3) and on a BeagleBoneBlack. I suggest to try with a clean install from FreeBSD-13.0-RELEASE-arm-armv7-GENERICSD.img just to be sure. > and: > > U-Boot 2021.04 (May 12 2021 - 13:36:42 +0000) > DRAM: 948 MiB > RPI 2 Model B (0xa21041) > . . . > FreeBSD/arm EFI loader, Revision 1.1 > Command line arguments: l > Image base: 0x39df8000 > EFI version: 2.80 > EFI Firmware: Das U-Boot (rev 8225.1024) > Console: comconsole (0) > Load Path: /efi\boot\bootarm.efi > . . . > Found EFI removable media binary efi/boot/bootarm.efi > 1396100 bytes read in 38 ms (35 MiB/s) > libfdt fdt_check_header(): FDT_ERR_BADMAGIC This line doesn't looks good. > Booting /efi\boot\bootarm.efi > Consoles: EFI console > |/-\|/-\|/ Reading loader env vars from /efi/freebsd/loader.env > . . . > Hit [Enter] to boot immediately, or any other key for command prompt. > Booting [/boot/kernel/kernel]... > Using DTB provided by EFI at 0x7ef6000. > Kernel entry at 0x33e00200... > Kernel args: (null) > > No *.scr files, no ubldr* files. Showing > from the efi partition mounted on a Rock64: > > # find /mnt/dtb/ -print > /mnt/dtb/ > /mnt/dtb/sun8i-h3-orangepi-plus2e.dtb > /mnt/dtb/overlays > /mnt/dtb/overlays/sun8i-h3-i2c0.dtbo > /mnt/dtb/overlays/spigen-rpi2.dtbo > > # find /mnt/efi/ -print > /mnt/efi/ > /mnt/efi/boot > /mnt/efi/boot/bootarm.efi > > # ls -Tld /mnt/u* > -rwxr-xr-x 1 root wheel 475420 May 12 06:39:06 2021 /mnt/u-boot.bin > > # ls -Tld /mnt/*.scr > ls: /mnt/*.scr: Invalid argument > > I'll not list the files from the RPi* firmware. > > > >> and that is the last of the output. > >> > >> The RPi2 v1.1 is similar: > >> > >> Hit [Enter] to boot immediately, or any other key for command prompt. > >> Booting [/boot/kernel/kernel]... > >> Using DTB provided by EFI at 0x7ef6000. > >> Kernel entry at 0x33e00200... > >> Kernel args: (null) > >> > >> and that is the last of the output. > > === > Mark Millard > marklmi at yahoo.com > ( dsl-only.net went > away in early 2018-Mar) > -- Emmanuel Vadot <[email protected]> <[email protected]> _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-arm To unsubscribe, send any mail to "[email protected]"