U-Boot for HoneyComb LX2

Hi,

I'm working on three ports to compile BL2, BL31, BL32 and BL33 (u-boot)
bootloaders for HoneyComb LX2 in FreeBSD. They're based on what NXP shared in
their Layerscape SDK and patches from SolidRun [1].

I've managed to compile Reset Configuration Word (rcw), u-boot and ARM trusted
firmware (atf) and write them to one of the existing images shared by
SolidRun [2].

However, my HoneyComb LX2 is on a way to me and this is why I cannot try to
boot the resulted image on my own. I'm really interested how far it'll go, but
I don't expect anything beyond u-boot. Could somebody who has HoneyComb do me
a favor and try to boot that image of mine? It should work with DDR4-3200
only:

	ftp://mcusim.org/ftp/lx2160acex7_2000_700_3200_8_5_2-2fff64e_changed_bld.img.xz

If you want to take a look at the sysutils/rcw-lx2160acex7,
sysutils/u-boot-lx2160acex7 and sysutils/atf-lx2160acex7, here is the link:

	https://github.com/mcusim/freebsd-ports

Thanks in advance.

Regards,
Dmitry

[1] https://github.com/SolidRun/lx2160a_build
[2] https://images.solid-run.com/LX2k/lx2160a_build/