Re: main-n247723-6329ca325e02 based build, booted on Rock64: "DTB overlay 'TSLOG' not compatible"
Mark Millard via freebsd-arm <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <[email protected]> |
On 2021-Jul-5, at 00:42, Mark Millard <marklmi at yahoo.com> wrote: > During booting, after: > > applying DTB overlay '/boot/dtb/overlays/rk3328-dwc3.dtbo' > > there is a console message: > > DTB overlay 'TSLOG' not compatible > > > For reference: > > # uname -apKU > FreeBSD Rock64_RPi_4_3_2v1p2 14.0-CURRENT FreeBSD 14.0-CURRENT #2 main-n247723-6329ca325e02-dirty: Sun Jul 4 22:07:42 PDT 2021 root@CA72_16Gp_ZFS:/usr/obj/BUILDs/main-CA53-nodbg-clang/usr/main-src/arm64.aarch64/sys/GENERIC-NODBG-CA53 arm64 aarch64 1400024 1400024 > > > This is not a context with the notice: > > WARNING: DTB version is 5.10 while kernel expects 5.13, please update the DTB in the ESP > > 5.13 dtb materials are in place. There are a few later messages that some of which might be of interest as well: rk3328_cru0: <Rockchip RK3328 Clock and Reset Unit> mem 0xff440000-0xff440fff on ofwbus0 Cannot set frequency for clk: aclk_bus_pre, error: 34 rk3328_cru0: Failed to set aclk_bus_pre to a frequency of 15000000 Cannot set frequency for clk: aclk_peri_pre, error: 34 rk3328_cru0: Failed to set aclk_peri_pre to a frequency of 15000000 . . . pcm0: no driver attached to cpu node pcm1: no driver attached to cpu node . . . pcm2: no driver attached to cpu node === Mark Millard marklmi at yahoo.com ( dsl-only.net went away in early 2018-Mar)