Re: git: 1dec3639fd0c - main - sysutils/u-boot: Update to 2021.07

On Mon, 12 Jul 2021 13:44:43 +0200
"Herbert J. Skuhra" <[email protected]> wrote:

> Hi Emmanuel,
> 
> thanks for your feedback.
> 
> On Mon, Jul 12, 2021 at 11:50:10AM +0200, Emmanuel Vadot wrote:
> > 
> >  So I took the latest snapshot image available on the ftp
> > (FreeBSD-14.0-CURRENT-arm-armv7-GENERICSD-20210701-c5f4772c66d-247671.img)
> >  and dd u-boot for the nanopi_m1plus on it.
> >  The snapshot already have the u-boot for BeagleBone and RPI*
> > 
> >  No problems on the BBB
> >  No problems on the NanoPi M1Plus
> >  I do see the hang on the RPI2 though (RPI2 v1.1)
> > 
> >  Commit 60a376b09332a0cf061b3 in u-boot removes
> > CONFIG_EFI_GRUB_ARM32_WORKAROUND from the RPI2 defconfig but we do
> > re-add it in the ports tree (see
> > https://cgit.freebsd.org/ports/tree/sysutils/u-boot-master/Makefile#n215
> > and
> > https://cgit.freebsd.org/ports/tree/sysutils/u-boot-master/files/FreeBSD_Fragment#n2)
> > 
> >  So if you bisected from u-boot tree directly and didn't use a fragment
> > that's normal to get this commit as the first bad one.
> 
> I was lazy and built the port (created a *.tar.bz2 archive from
> the git checkout or rcX downloads and modified distinfo). 
> 
> >  Note that the images don't have a boot.scr (u-boot script) for a long
> > time now, we rely on EFI. (See commit
> > https://cgit.freebsd.org/src/commit/?id=33bec6889a0957d1c06c36378157a46a95fcb004)
> 
> Yes, my RPi2 only boots without this change (a361eabce3cf). Maybe it
> should be reverted until we have a proper fix? Or create images with
> older U-Boot (2021.01)?

 Damn, I missed that u-boot-rpi2 used its own fragment.
 Can you try adding CONFIG_EFI_GRUB_ARM32_WORKAROUND=y to
sysutils/u-boot-rpi2/files/rpi2_fragment and see if that fixes the
issue for you ?

> >  For your mmc problem this can be that you are not using the dtoverlay
> > that switches between the sdhost controller and the sdhci. Using this
> > rewrite the mmc number for u-boot.
> 
> This happens even with the official builds!
> 
> FreeBSD-13.0-STABLE-arm64-aarch64-RPI-20210701-6aee7855180-246143.img.xz
> ==> OK (U-Boot 2021.04)
> FreeBSD-13.0-STABLE-arm64-aarch64-RPI-20210708-f6d448caf69-246212.img.xz
> ==> Not OK. (U-Boot 2021.07)
> 
> I am using U-Boot 2021.04 again because I still don't know how to boot
> from mmc device 2 automatically.
> 
> -- 
> Herbert
> 


-- 
Emmanuel Vadot <[email protected]> <[email protected]>