Re: Hmmmm.... wha happen?

On Thu, 19 Aug 2021 14:36:27 -0400
Karl Denninger <[email protected]> wrote:

> On 8/19/2021 07:29, Karl Denninger wrote:
> >
> > On 8/18/2021 22:08, Herbert J. Skuhra wrote:
> >> On Wed, Aug 18, 2021 at 08:41:08PM -0400, Karl Denninger wrote:
> >>> Ok, did I screw this up or did the updates to the RPI firmware 
> >>> somewhere
> >>> blow things up for a 3 Model B?  The SD card slot appears to have
> >>> disappeared.
> >> https://lists.freebsd.org/archives/freebsd-arm/2021-July/000343.html
> >>
> >> https://lists.freebsd.org/archives/freebsd-arm/2021-July/000371.html
> >
> > So..... if I'm running packages......
> >
> > (I suppose I could try to "overload" the rpi-3 uboot port, which, it 
> > appears, is 2017.01!  Uh, that's probably not what I want EITHER.)
> >
> Well now I may have a dead end for the moment.
> 
> Just blew away the ports tree on the box, fetched the current one, and 
> attempted to build just sysutils/u-boot-rpi3 and got:
> 
> ......
> 
> In file included from tools/kwbimage.c:14:
> In file included from include/image.h:19:
> In file included from ./arch/sandbox/include/asm/byteorder.h:20:
> In file included from include/linux/byteorder/little_endian.h:13:
> /usr/local/include/linux/types.h:9:18: error: typedef redefinition with
>        different types ('uint64_t' (aka 'unsigned long') vs 'unsigned 
> long long')
> typedef uint64_t __u64;
>                   ^
> include/asm-generic/int-ll64.h:29:42: note: previous definition is here
> __extension__ typedef unsigned long long __u64;
> 
> and that's that, so obviously there's something in the port requirement 
> that is not on the box and the ports system, when trying to build this 
> port alone, fails to resolve.
> 
> It's blowing up in u-boot-tools which has to build first.
> 
> Can't patch the code if it won't build.  I'll see if I can find an older 
> copy of u-boot for the RPI3 somewhere.
> 
> Crap.
> 

 I'm not aware of any problems building u-boot currently, on what
system did you try ?

-- 
Emmanuel Vadot <[email protected]> <[email protected]>