Re: booting recent rpi current/14 snapshots

On 2021-Nov-30, at 09:50, tech-lists <[email protected]> wrote:

> Hello arm@
> 
> Has anyone tried booting the recent current snapshots?
> 
> I've tried these ones. all written to good microsd cards, and sha256 checked:
> 
> https://download.freebsd.org/ftp/snapshots/ISO-IMAGES/14.0/FreeBSD-14.0-CURRENT-arm64-aarch64-RPI-20211111-448bcd01dc5-250603.img.xz
> https://download.freebsd.org/ftp/snapshots/ISO-IMAGES/14.0/FreeBSD-14.0-CURRENT-arm64-aarch64-RPI-20211118-4082b189d2c-250820.img.xz
> https://download.freebsd.org/ftp/snapshots/ISO-IMAGES/14.0/FreeBSD-14.0-CURRENT-arm64-aarch64-RPI-20211125-3ede04c78c7-251054.img.xz
> 
> Get a rainbow screen and there it stops.
> 
> Anyone know of a working version?
> 
> What I'm trying to do is to run the installer and point it to a connected usb3
> disk in order to facilitate usb3 boot-to-zfs. But I'm not even getting as far as the installer.

Looks like that last (20211125-3ede04c78c7 put on a microsd card)
has:

# mount -onoatime -tmsdosfs /dev/mmcsd1s1 /media

# strings /media/start4.elf | grep VC_BUILD_ID_
VC_BUILD_ID_USER: dom
VC_BUILD_ID_TIME: 12:10:40
VC_BUILD_ID_VARIANT: start
VC_BUILD_ID_TIME: Feb 25 2021
VC_BUILD_ID_BRANCH: bcm2711_2
VC_BUILD_ID_HOSTNAME: buildbot
VC_BUILD_ID_PLATFORM: raspberrypi_linux
VC_BUILD_ID_VERSION: 564e5f9b852b23a330b1764bcf0b2d022a20afd0 (clean)

(I ignore armstub8-gic.bin here.)

# strings /media/u-boot.bin | grep "U-Boot 2"
U-Boot 2021.07 (Nov 25 2021 - 05:58:44 +0000)

# more /media/config.txt
[all]
arm_64bit=1
dtparam=audio=on,i2c_arm=on,spi=on
dtoverlay=mmc
dtoverlay=disable-bt
device_tree_address=0x4000
kernel=u-boot.bin

[pi4]
hdmi_safe=1
armstub=armstub8-gic.bin


But I'm modifying it to:

# more /media/config.txt
[all]
arm_64bit=1
dtparam=audio=on,i2c_arm=on,spi=on
dtoverlay=mmc
dtoverlay=disable-bt
device_tree_address=0x4000
kernel=u-boot.bin

[pi4]
#hdmi_safe=1
armstub=armstub8-gic.bin

# Local additions:

[all]
enable_uart=1
uart_2ndstage=1
dtdebug=1
disable_commandline_tags=1
disable_overscan=1
gpu_mem_1024=32

[pi4]
over_voltage=6
arm_freq=2000
sdram_freq_min=3200
force_turbo=1

[all]


Note the disabling of hdmi_safe=1 .

The 8 GiByte RPi4B's eeprom also has debugging enabled.


So with a monitor attached (unusual for me) and a
serial console as well, it boots to the login prompt
just fine, both on the serial console and the monitor.
I logged in to both.

# uname -apKU
FreeBSD generic 14.0-CURRENT FreeBSD 14.0-CURRENT #0 main-n251054-3ede04c78c7: Thu Nov 25 09:59:03 UTC 2021     [email protected]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC  arm64 aarch64 1400042 1400042


For reference:

EFI framebuffer information:
addr, size     0x3e402000, 0x7e9000
dimensions     1920 x 1080
stride         1920
masks          0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
. . .
VT(efifb): resolution 1920x1080
. . .
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fb0: keeping existing fb bpp of 32
fbd0 on fb0
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "efifb" with new "fb".
fb0: 1920x1080(1920x1080@0,0) 32bpp
fb0: fbswap: 1, pitch 7680, base 0x3e402000, screen_size 8355840


===
Mark Millard
marklmi at yahoo.com
( dsl-only.net went
away in early 2018-Mar)