Re: ld: error: bzlib.pico:147: unclosed quote

bob prohaska <[email protected]>
Newsgroups gmane.os.freebsd.devel.arm
Message-ID <[email protected]>
On Tue, Dec 21, 2021 at 08:14:58PM -0800, Mark Millard wrote:
> On 2021-Dec-21, at 20:03, bob prohaska <[email protected]> wrote:
> 
> > On Tue, Dec 21, 2021 at 05:51:59PM -0800, Mark Millard wrote:
> 
> Not noise? Which adapter was in use during the corruption?
> Does this mean that you have showed 2 disks to have issues
> using the same adapter on the same RPi3* (but with different
> firmware/U-Boot/Loader/kernel/World's on the 2 disks)?
>
No, I don't think so. I expected the enumeration problem
to move with the disks. Instead neither disk enumerated
readily when moved. The disks have different bridge chips.
 
> Whatever the details, such would be good information to
> know.

I've been offered a Windows 7 machine that can be used to apply
the Sabrent firmware updater. That seems like the obvious thing
to try next in light of the error reported on the Pi3:
Read NVMe Identify Controller failed: scsi error unsupported field in scsi command

No clue if it'll help, but it's a relatively easy experiment.
The observations will be added to 
http://www.zefox.net/~fbsd/slow_usb_notes
I'll try to keep them somewhat more coherent if others are
trying to follow the story. 

Thanks for your help and attention!

bob prohaska
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.