Raspberry Pi 3B Slow Boot-up

Hi,

In the default config.txt file there is [pi4] line. If I'm going to remove
this [pi4] line, the boot-up process is very slow. Slow in a sense that
some extended time is observed as compared to the default. I already tested
emphasizing the boot_delay=1 but to no avail. The reason why I removed it
is because I want to change the settings of the HDMI display resolution as
changes will not take effect with the [pi4] line in RPi 3B.

With 14.0-CURRENT (February 24, 2022 snapshot) I have described my
resolution here
https://lists.freebsd.org/archives/freebsd-arm/2022-February/001070.html
however with the latest 14.0-CURRENT (March 10, 2022 snapshot) it's no
longer possible. Any idea what's going on?

Below is the default config.txt and my current config.txt for reference.

freebsd@generic:~ % cat /boot/msdos/config.txt
[all]
arm_64bit=1
dtparam=audio=on,i2c_arm=on,spi=on
dtoverlay=mmc
dtoverlay=disable-bt
device_tree_address=0x4000
kernel=u-boot.bin

[pi4]
hdmi_safe=1
armstub=armstub8-gic.bin

freebsd@generic:~ % cat /boot/msdos/config.txt
[all]
arm_64bit=1
dtparam=audio=on,i2c_arm=on,spi=on
dtoverlay=mmc
dtoverlay=disable-bt
device_tree_address=0x4000
kernel=u-boot.bin

hdmi_group=2
hdmi_mode=11
armstub=armstub8-gic.bin

Thanks,
Archimedes