Re: Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE

On 2022-Jul-5, at 08:09, Dr. Rolf Jansen <[email protected]> wrote:

>> . . .
> 
> That would be the second step. The first step would be that somebody else confirms my finding that building and running a custom kernel on a stock FreeBSD 13.1-RELEASE on RPi 4 does not work out. And actually that was my initial question.
> 
> - In case somebody raises her/his hand telling, that this worked flawlessly on their system,
>  then I would have a more in deep look, what might have gone wrong here.
> 
> - In case the issue would be confirmed, then I would submit a bug report, and the discussion
>  may continue in a more productive way on bugs.freebsd.org.

Summary of the later material:

It would appear that if building any kernels are
broken, it is specific to some custom kernel(s)
in question, not to building kernels in general.
13.1-RELEASE's install is able to build, install,
and boot its own generic kernel on a 8GiByte
RPi4B Rev. 1.4.

How I got to that conclusion . . .
(Written earlier.)

I'm doing (written as I go along):

Establish a USB3 media from FreeBSD-13.1-RELEASE-arm64-aarch64-RPI.img.xz
and releases/arm64/13.1-RELEASE/src.txz . Set up some basic configuration.

(Note: growfs is broken for the large expansion. I used dump and restore
for the ufs partition from a mounted non-grown dd of the .img file to
other media. I also copied over the msdosfs partition content. I set
up to have partition-based swap space as well. I used gpt partitioning.)

Boot via that media on a 8 GiByte RPi4B Rev. 1.4 .
Do some live setup to finish things off.

Then:

root@13R-ufs:~ # cd /usr/src
root@13R-ufs:~ # time make -j4 kernel-toolchain #  630.15 real 2302.72 user  94.36 sys
root@13R-ufs:~ # time make -j4 buildkernel      # 1790.12 real 6488.26 user 526.25 sys
root@13R-ufs:~ # time make -j4 installkernel    #    8.17 real   14.94 user  12.00 sys
root@13R-ufs:~ # diff -rq /boot/kernel/ /boot/kernel.old/ #??? Reproducible builds ???
Files /boot/kernel/kernel and /boot/kernel.old/kernel differ
Files /boot/kernel/kernel.bin and /boot/kernel.old/kernel.bin differ
root@13R-ufs:~ # shutdown -r now
. . .
Performing sanity check on sshd configuration.
Starting sshd.
Starting cron.
Starting background file system checks in 60 seconds.

Wed Jul  6 04:22:01 UTC 
FreeBSD/arm64 (13R-ufs) (ttyu0)

login: root
Password:
Jul  6 04:23:28 13R-ufs login[1210]: ROOT LOGIN (root) ON ttyu0
Last login: Wed Jul  6 03:18:32 on ttyu0
FreeBSD 13.1-RELEASE GENERIC

Welcome to FreeBSD!

Release Notes, Errata: https://www.FreeBSD.org/releases/
Security Advisories:   https://www.FreeBSD.org/security/
FreeBSD Handbook:      https://www.FreeBSD.org/handbook/
FreeBSD FAQ:           https://www.FreeBSD.org/faq/
Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/
FreeBSD Forums:        https://forums.FreeBSD.org/

Documents installed with the system are in the /usr/local/share/doc/freebsd/
directory, or can be installed later with:  pkg install en-freebsd-doc
For other languages, replace "en" with a language code like de or fr.

Show the version of FreeBSD installed:  freebsd-version ; uname -a
Please include that output and any error messages when posting questions.
Introduction to manual pages:  man man
FreeBSD directory layout:      man hier

To change this login announcement, see motd(5).
root@13R-ufs:~ # uname -apKU
FreeBSD 13R-ufs 13.1-RELEASE FreeBSD 13.1-RELEASE GENERIC arm64 aarch64 1301000 1301000
root@13R-ufs:~ # freebsd-version -kru
13.1-RELEASE
13.1-RELEASE
13.1-RELEASE
root@13R-ufs:~ # gpart show -pl
=>       40  468862048    da0  GPT  (224G)
         40      32728         - free -  (16M)
      32768     524288  da0p1  13Refi  (256M)
     557056   29360128  da0p2  13Rswp14  (14G)
   29917184    4194304         - free -  (2.0G)
   34111488   33554432  da0p3  13Rswp16  (16G)
   67665920  356515840  da0p4  13Rufs  (170G)
  424181760   44680328         - free -  (21G)

root@13R-ufs:~ # gpart show -p
=>       40  468862048    da0  GPT  (224G)
         40      32728         - free -  (16M)
      32768     524288  da0p1  efi  (256M)
     557056   29360128  da0p2  freebsd-swap  (14G)
   29917184    4194304         - free -  (2.0G)
   34111488   33554432  da0p3  freebsd-swap  (16G)
   67665920  356515840  da0p4  freebsd-ufs  (170G)
  424181760   44680328         - free -  (21G)
root@13R-ufs:~ # df -m
Filesystem      1M-blocks Used  Avail Capacity  Mounted on
/dev/gpt/13Rufs    168604 8159 146956     5%    /
devfs                   0    0      0   100%    /dev
/dev/gpt/13Refi       255   25    230    10%    /boot/efi
root@13R-ufs:~ # ls -Tld /usr/obj/usr/src/arm64.aarch64/sys/*/
drwxr-xr-x  3 root  wheel  91136 Jul  6 04:17:59 2022 /usr/obj/usr/src/arm64.aarch64/sys/GENERIC/
root@13R-ufs:~ # 

The build and install seems to have worked just fine,
allowing booting and operation.


Notes:

The builds were done via being logged in via ssh. The
serial console causes more time to be taken waiting
for the build output as it progresses, so I avoid
it for builds.

This media will be around for some time to possibly
do other experiments with if desired. Provide
explicit instructions if you want a build tried. The
starting context would be as above but the instructions
might say to "rm -fr" various things first, if
appropriate.

===
Mark Millard
marklmi at yahoo.com