Re: SPI and si4463 radio
Nick Kostyria <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <20220721034620.5d1e5372@thinkbook> |
On Thu, 1 Apr 2021 20:38:01 +0300 Nick Kostirya via freebsd-arm <[email protected]> wrote: > Hello. > I need help with SPI and si4463 radio. > > si4463 radio works great on Arduino Pro Mini. > FreeBSD 12.2 (armv7 r369379) on NanoPi NEO no not work with it. > MISO always has the HIGH state. > The logical analyser says that values of CLK, MOSI, CS is identical to Arduino. > The only difference is that interval between CS and CLK is much bigger on FreeBSD. > > By the way BMP280 works fine on FreeBSD. I found the reason! Si4463 radio works on NetBSD 9.2 on the same ARM board. I compared signals and I saw what clock polarity in idle state is logic HIGH on FreeBSD 12.3! NetBSD 9.2 have LOW. Why does BMP280 work fine on FreeBSD, but not Si4463? BMP280 support SPI_MODE_0 and SPI_MODE_3, but Si4463 support only SPI_MODE_0. SPI_MODE_0 implies logic LOW in idle state of clock. I haven't figured out how to fix it yet... Question. Other boards have same behavior? Or is it only on Allwinner H3?