Re: ARM64 system error

Andrew Turner <[email protected]>
Newsgroups gmane.os.freebsd.devel.arm
Message-ID <[email protected]>

> On 31 Jul 2022, at 17:55, John F Carr <[email protected]> wrote:
> 
> My OverDrive 1000 (Cortex A57) running CURRENT just crashed with the unhelpful message "panic: Unhandled System Error".  Is there any way to get better information?  The ESR value bf000000 translates to "system error with implementation-defined code 0" so that's not much use.  The instruction associated with the interrupt can't fault ("subs w22, w22, #0x1") so it must be an asynchronous error.  On other systems I've seen bits you can test or registers you can read to get details.

By my reading of the Cortex-A57 documentation [1] I think the ESR value shows the exception can be attributed to the current core, is containable to a given code sequence, and is a decode error.

It’s likely due to msk_phy_readreg accessing the phy, but it doesn’t respond quickly enough.

Does an older kernel boot? If so can you try bisecting to find which commit caused the panic.

Andrew

[1] Bottom of https://developer.arm.com/documentation/ddi0488/h/system-control/aarch64-register-descriptions/exception-syndrome-register--el1-and-el3?lang=en

> 
>  x0:                0
>  x1: ffff0000b55bd000 (crypto_dev + b3f34ec0)
>  x2:             2880
>  x3:               20
>  x4:               d3
>  x5:                0
>  x6:              100
>  x7: ffff00011063daa0
>  x8: ffff00000077218c (generic_bs_r_2 + 0)
>  x9:             2880
> x10: ffff0000001ff9f4 (msk_phy_readreg + 84)
> x11:         a0000045
> x12:         56000000
> x13:         5e4a6f28
> x14: ffff000000c4d038 (vnet_entry_ipport_stoprandom + 0)
> x15: ffffa000016b3000
> x16:         40ef9400
> x17:                a
> x18: ffff0000b550e560 (crypto_dev + b3e86420)
> x19: ffff0000b57dc000 (crypto_dev + b4153ec0)
> x20: ffffa000029dc800
> x21:             2880
> x22:              3c4
> x23:             796d
> x24: ffffa000017f4100
> x25: ffff000000ad3da0 (miibus_readreg_desc + 0)
> x26: ffff000000bb6000 (vop_deallocate_desc + 28)
> x27: ffff000000e36980 (cc_cpu + 80)
> x28: ffff000000b1b828 (lock_class_mtx_sleep + 0)
> x29: ffff0000b550e670 (crypto_dev + b3e86530)
>  sp: ffff0000b550e560
>  lr: ffff0000001ff9f0 (msk_phy_readreg + 80)
> elr: ffff00000077806c (handle_el1h_irq + 8)
> spsr:         a00002c5
> far:                0
> esr:         bf000000
> panic: Unhandled System Error
> cpuid = 2
> time = 1659270153
> KDB: stack backtrace:
> db_trace_self() at db_trace_self
> db_trace_self_wrapper() at db_trace_self_wrapper+0x30
> vpanic() at vpanic+0x13c
> panic() at panic+0x44
> do_serror() at do_serror+0x40
> handle_serror() at handle_serror+0x38
> --- system error, esr 0xbf000000
> handle_el1h_irq() at handle_el1h_irq+0x8
> --- interrupt
> msk_phy_readreg() at msk_phy_readreg+0x84
> e1000phy_status() at e1000phy_status+0x114
> e1000phy_service() at e1000phy_service+0x420
> mii_tick() at mii_tick+0x50
> msk_tick() at msk_tick+0x44
> softclock_call_cc() at softclock_call_cc+0x128
> softclock_thread() at softclock_thread+0xc4
> fork_exit() at fork_exit+0x74
> fork_trampoline() at fork_trampoline+0x14
> KDB: enter: panic
> [ thread pid 2 tid 100026 ]
> Stopped at      kdb_enter+0x44: undefined       f907c27f
>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.