Re: following -current on rpi4 with zfs-on-root

Mark Millard <[email protected]>
Newsgroups gmane.os.freebsd.devel.arm
Message-ID <[email protected]>
On 2022-Sep-23, at 16:32, void <[email protected]> wrote:

> On Tue, Sep 20, 2022 at 02:36:02PM -0600, Warner Losh wrote:
>>> >
>>> >> For EFI, there are many choices. The default installation places
>>> >> loader.efi into the ESP in EFI\FREEBSD\LOADER.EFI. The following
>>> >> updates it (assuming the ESP is on p1, and isn't already mounted):
>>> >> mount -t msdos /dev/ada0p1 /boot/efi
>>> >> cp /boot/efi/loader.efi /boot/efi/efi/freebsd

I expect that should reference ( unsure for EFI vs. efi ):

cp /boot/loader.efi /boot/efi/EFI/freebsd/

The point being to copy from ZFS/UFS to the ESP
for environments that use EFI\FREEBSD\LOADER.EFI .

-t msdos vs. -t msdosfs ?

>>> >> If you have a non-standard setup, please see the EFI notes section.
> 
> Hi Warner,
> 
> On a freshly rebuilt system after make installworld (but before anything else),
> 
> # mount | grep msdos
> 
> /dev/da0p1 on /boot/efi (msdosfs, local)
> 
> There is no loader.efi in /boot/efi on arm64.aarch64 for raspberry pi 4

So far as I know /boot/efi/loader.efi is never the right
path for ZFS, UFS, or the ESP under the msdosfs ( given
mount -t msdos /dev/ada0p1 /boot/efi ). /dev/ada0p1 would
contain an EFI directory that has more substructure.

> bootaa64.efi is in /boot/efi/EFI/BOOT, so I followed Marek's instructions and copied loader_lua.efi to bootaa64.efi from
> /usr/obj/usr/src/arm64.aarch64/stand/efi/loader_lua/

After the install world, cp /boot/loader.efi /boot/efi/EFI/BOOT/
should work as well. ( /boot/loader.efi having been updated in
ZFS/UFS. )


===
Mark Millard
marklmi at yahoo.com
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.