Re: /usr/src/Makefile.inc1 typo?

Warner Losh <[email protected]>
Newsgroups gmane.os.freebsd.devel.arm
Message-ID <CANCZdfpA1a-K7i4sbAuAJgROY5hogH3z4nNDiJMiWqPo5RDRYQ@mail.gmail.com>
On Mon, Dec 12, 2022, 2:21 PM Mark Millard <[email protected]> wrote:

> On Dec 12, 2022, at 12:39, bob prohaska <[email protected]> wrote:
>
> > It looks like there might be a typo (or nomenclature change)
> > in armv7.
> >
> > Last attempt at installkernel stopped with
> > make[1]: "/usr/src/Makefile.inc1" line 163: Unknown target armv7:armv7
> > . . .
>
> You suffer from bad timing relative to main's [so: 14's]:
>
> Sun, 11 Dec 2022
>    . . .
>     • git: 83bf6ab56829 - main - uname: switch machine to HW_MACHINE_ARCH
> Piotr Kubaj
> . . .
> Mon, 12 Dec 2022
>    . . .
>     • git: 85dd85323614 - main - Revert "uname: switch machine to
> HW_MACHINE_ARCH" Piotr Kubaj
>     • Re: git: 83bf6ab56829 - main - uname: switch machine to
> HW_MACHINE_ARCH Piotr Kubaj
> . . .
>
> Having a system built from a source tree from between the 2
> commits one ends up with a broken default native build
> environment with complaints about "target NAME:NAME" when the
> correct naming for the context has 2 distinct names, such as
> arm and armv7 in your context. (That need not be the only
> complaint.)
>
> It may be that explicitly listing TARGET=arm TARGET_ARCH=armv7
> on either the make command line(s) or in the environment(s)
> might allow a valid build from the messed up context. (But
> such is untested.) I've no clue if a full rebuild-from-scratch
> might be needed. If it works, you would likely need to be
> explicit, even for installkernel and installworld, not just
> for building.
>

Libc is all that's needed. Use "make MACHINE=arm" though maybe it's a
general workaround.

Warner

The build(s) should be based on source that does not contain
> the 83bf6ab56829 change.
>
> ===
> Mark Millard
> marklmi at yahoo.com
>
>
>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.