Would like to help you, Victor, with building FreeBSD 13.0 for Nitrogen8m ARM64 imx8 board
Fred Finster <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <[email protected]> |
From Posted FreeBSD-arm mailing list https://lists.freebsd.org/archives/freebsd-arm/2022-December/002094.html Hello Victor, I am just a FreeBSD user, I have experience creating an FreeBSD disk image and a kernel image for Raspberry Pi 4B /w 8GB. Give me a call +1 971-718-9144 Anytime till 10pm PST would be fine. https://ghostbsd-arm64.blogspot.com/2022/09/freebsd-140-compiling-kernel-for.html Yes, I don't have the specific information for the MX imx8 Nitrogen Board, yet I believe I can help you with the details of building a booting kernel and creating a disk image. Which kind of disk type do you wish to boot from? USB Flash Disk, USB 2.0 or 3.0 External case with a SATA SSD or Hard drive inside? Or other type like NVMe, or SD card. I assume UEFI GPT partitioned disk. Here is a telegram group ARM Open-Source (I am owner of this group) you are welcome to ask/post questions, share information pictures https://t.me/+ST6N61pnu3Di8zgk . If you prefer to be anonymous with your activities, then just email me here. Look forward to helping you, Victor. What development platform do you use? t.me/GhostBSD/download "latest" version. Write to a USB Flash drive stick. Boot the live image ( needs 4GB of dram memory). Add a SSD 500GB, usb external or internal SATA or Nvme. You will have GUI MATE desktop on a GhostBSD.org ( downstream of FreeBSD kernel sources). I want to see FreeBSD running on your imx8 Nitrogen hardware. Will be reading the links you shared in your post. Respectfully Fred -- Fred Finster [email protected] +1 971-718-9144 https://GhostBSD-ARM64.blogspot.com https://ghostbsd.org -- Fred Finster [email protected] +1 971-718-9144 https://GhostBSD-ARM64.blogspot.com https://ghostbsd.org