Re: rpi3b+ ue0 too late to be configured on boot?

On 28 Dec 2022, at 16:42, Bjoern A. Zeeb wrote:

> Hi,
>
> does anyone else have the problem on latest main that the ue0 on an
> rpi3b+ doesn't show up in time for the rc netif to configure it (or at
> least it looks like)?

I don’t see that problem.  I tried the 12/24 snapshot of main on an
RPi3B+, and ue0 configured via DHCP on the initial boot, and on a reboot.

I did have problems with the HDMI console, some of which are new; I will
follow up on that separately.  Specifically, USB keyboard input didn’t
work to the loader, and I didn’t see console output from user-level
startup until I disabled boot_multicons and boot_serial.  The second
problem is relatively new.

		Mike

> While during boot USB seems to need a wait-delay now, which it hadn't in
> the last years for me?
>
> ------------------------------------------------------------------------
> ...
> Feeding entropy: .
> ELF ldconfig path: /lib /usr/lib
> ugen1.2: <vendor 0x0424 product 0x9514> at usbus1
> uhub1 on uhub0
> uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus1
> uhub1: MTT enabled
> lo0: link state changed to UP
> uhub1: 5 ports with 4 removable, self powered
> ugen1.3: <vendor 0x0424 product 0xec00> at usbus1
> smsc0 on uhub1
> smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus1
> smsc0: chip 0xec00, rev. 0002
> miibus0: <MII bus> on smsc0
> smscphy0: <SMC LAN8700 10/100 interface> PHY 1 on miibus0
> smscphy0: OUI 0x00800f, model 0x000c, rev. 3
> smscphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> ue0: <USB Ethernet> on smsc0
> ue0: bpf attached
> ue0: Ethernet address: xx:xx:xx:xx:xx:xx
> Starting Network: lo0.
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
> ...
> ------------------------------------------------------------------------
>
> If running manually after boot (again) it all works fine?
>
> # sh /etc/rc.d/netif start ue0
> smsc0: chip 0xec00, rev. 0002
> Starting Network: ue0.
> ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> ...
>
>
>
> Not that it should matter - this is with https://github.com/pftf/RPi3/releases/tag/v1.38
>
> /bz
>
> -- 
> Bjoern A. Zeeb                                                     r15:7