Re: How to make FreeBSD's kernel boot a RPi4B with modern RPi* firmware
Mark Millard <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <[email protected]> |
On Jan 8, 2023, at 15:27, Bjoern A. Zeeb <[email protected]> wrote: > On Sun, 8 Jan 2023, Klaus Küchemann wrote: > >> What wasn’t clear for me is whether crashes like those from Björn Zeeb have any relation to firmware/u-boot/eeprom, >> but reading closer I guess he’s probably using an unsupported bootloader that could cause problems, > > I wouldn't call it "unsupported" just "non-default" but I am also on an RPi3B+ and not on a 4. Just an FYI . . . All the following need the patching in order to use sufficiently modern RPi* firmware (and the involved live Device Trees). I only list what I've tested (what I've access to): "C0T" 8 GiByte Rev1.5 RPi4B "B0T" 8 GiByte Rev1.4 and 4 GiByte Rev1.1 RPI4Bs RPi3B RPi2B v1.2 RPi2B v1.1 (so: armv7) I expect that the issue is far more general then that. === Mark Millard marklmi at yahoo.com