Re: The import of openzfs vs. armv7: boot crashs

On Tue, Apr 18, 2023 at 5:04 PM Mark Millard <[email protected]> wrote:

> On Apr 18, 2023, at 15:46, Warner Losh <[email protected]> wrote:
>
> > Fun...
> >
> > I'm also fighting aarch64 issues...
>
> Of what kind? I've been able to use things as committed
> in FreeBSD (block_cloning never having been enabled but
> jumping from before the import to, effectively, after
> the FreeBSD adjustments). But I have not tried anything
> that is different as committed in openzfs.
>
> (I'm one of those that tested poudriere bulk activity
> via separate media from my normal aarch64 context. Those
> tests had no problems once the full set up adjustments
> was present in my context.)
>

All boot loader issues for special environments. Not in the kernel,
so maybe unrelated and I shouldn't have said anything.

I'm guessing that upstream needs a generic way to disable all
acceleration, even if that has bad performance. I'm looking for a
good way to do that (once I get done with the bugs I was fixing
when I noticed this issue).

Warner


> > Warner
> >
> > On Tue, Apr 18, 2023, 4:45 PM Mark Millard <[email protected]> wrote:
> >
> https://github.com/openzfs/zfs/commit/d0cbd9feaf5b82130f2e679256c71e0c7413aae9
> >
> > does not seem to cover armv7, just aarch64. (FreeBSD disabled
> > floating point for both armv7 and aarch64 but that is a
> > different change than above.)
>
> I probably should have explicitly noted that the fpu disabling
> was from after the snapshot being tested here.
>
> The point of the snapshot test (the most recent available) was
> to find out if armv7 crashed before the fpu-use disabling commit.
>
> > I used:
> >
> >
> FreeBSD-14.0-CURRENT-arm-armv7-GENERICSD-20230406-f21faa67ab6b-262010.img.xz
>
> That is from after the import and after:
>
>     • git: eb1feadc201a - main - zfs: fix null ap->a_fsizetd NULL pointer
> derefernce Martin Matuska
>
> but with no other zfs changes. It does not contain:
>
>     • git: d6e24901349d - main - zfs: disable kernel fpu usage on arm and
> aarc64 Mateusz Guzik
>
> (But the openzfs changes are different.)
>
> > booted an RPi2B v1.1 and tried (note the KSTACK_PAGES notice and the
> > "undefined floating point instruction" notice):
> >
> > # zpool import
> > ZFS NOTICE: KSTACK_PAGES is 2 which could result in stack overflow panic!
> > Please consider adding 'options KSTACK_PAGES=4' to your kernel config
> > panic: undefined floating point instruction in supervisor mode
> > cpuid = 2
> > time = 1680784610
> > KDB: stack backtrace:
> > db_trace_self() at db_trace_self
> >          pc = 0xc05eb154  lr = 0xc007a688 (db_trace_self_wrapper+0x30)
> >          sp = 0xdd25c480  fp = 0xdd25c598
> > db_trace_self_wrapper() at db_trace_self_wrapper+0x30
> >          pc = 0xc007a688  lr = 0xc02eb1b4 (vpanic+0x140)
> >          sp = 0xdd25c5a0  fp = 0xdd25c5c0
> >          r4 = 0x00000100  r5 = 0x00000000
> >          r6 = 0xc0736bfc  r7 = 0xc0b1aea8
> > vpanic() at vpanic+0x140
> >          pc = 0xc02eb1b4  lr = 0xc02eaf94 (doadump)
> >          sp = 0xdd25c5c8  fp = 0xdd25c5cc
> >          r4 = 0xc0b92210  r5 = 0x00000000
> >          r6 = 0xc0610ca0  r7 = 0xf4210a0d
> >          r8 = 0xddf32e4c  r9 = 0x00000013
> >         r10 = 0xdd25c6c0
> > doadump() at doadump
> >          pc = 0xc02eaf94  lr = 0xc0610eb0 (vfp_new_thread)
> >          sp = 0xdd25c5d4  fp = 0xdd25c638
> >          r4 = 0xdd25c6c0  r5 = 0xdd25c5cc
> >          r6 = 0xc02eaf94 r10 = 0xdd25c5d4
> > vfp_new_thread() at vfp_new_thread
> >          pc = 0xc0610eb0  lr = 0xc060ff84 (undefinedinstruction+0x178)
> >          sp = 0xdd25c640  fp = 0xdd25c6b8
> > undefinedinstruction() at undefinedinstruction+0x178
> >          pc = 0xc060ff84  lr = 0xc05edaa8 (exception_exit)
> >          sp = 0xdd25c6c0  fp = 0xdd25c750
> >          r4 = 0x20000013  r5 = 0xde45e000
> >          r6 = 0xdd25c890  r7 = 0xdd25c8b0
> >          r8 = 0x00000000  r9 = 0x00000000
> >         r10 = 0xdd25c8c0
> > exception_exit() at exception_exit
> >          pc = 0xc05edaa8  lr = 0xddf31f20 (K256)
> >          sp = 0xdd25c750  fp = 0xdd25c750
> >          r0 = 0xdd25c890  r1 = 0xde45e000
> >          r2 = 0xde45e400  r3 = 0xddf309fc
> >          r4 = 0x00000400  r5 = 0xde45e000
> >          r6 = 0xdd25c890  r7 = 0xdd25c8b0
> >          r8 = 0x00000000  r9 = 0x00000000
> >         r10 = 0xdd25c8c0 r12 = 0xdd25c7a0
> > zfs_sha256_block_neon() at zfs_sha256_block_neon+0x1c
> >          pc = 0xddf32e4c  lr = 0xc0946e8c (pcpup)
> >          sp = 0xdd25c758  fp = 0xc0b0aeec
> >          r4 = 0xc0919610  r5 = 0xc0919630
> >          r6 = 0xc0919618  r7 = 0x642ebce2
> >          r8 = 0xc0b1b0ec  r9 = 0xc0915e88
> >         r10 = 0xc0b1b0dc
> > Fatal kernel mode data abort: 'Translation Fault (L1)' on read
> > trapframe: 0xdd25c330
> > FSR=00000005, FAR=95e29398, spsr=200000d3
> > r0 =dd25c424, r1 =81000000, r2 =95e29395, r3 =55555555
> > r4 =c08ae93c, r5 =00004aa0, r6 =00004aa0, r7 =c08d3e3c
> > r8 =00000001, r9 =c079567a, r10=0000000b, r11=dd25c3e0
> > r12=00000000, ssp=dd25c3c4, slr=00000001, pc =c0610308
> >
> > panic: Fatal abort
> > . . . (repeats over and over) . . .
> >
>
>
>
>
> ===
> Mark Millard
> marklmi at yahoo.com
>
>