Re: PinePro64 does not go past mountroot

José Pérez <[email protected]>
Newsgroups gmane.os.freebsd.devel.arm
Message-ID <[email protected]>
Hello Archimedes and titus,
I found out that only one USB port works out of 4, so I plugged the USB 
there and booted normally. BTW it's one of the 2.0 ports, the 3.0 port 
seems dead.

I gave titus advice a try, with no difference.

Not sure if the cause is in the U-Boot I have in the SPI, 2021.04.

I have to try and use another U-Boot and see how it works. Any 
suggestion? I saw that too recent ones are not too good either.

Tnx,

El 2023-08-03 17:32, titus escribió:
> try to stop it at the loader countdown then
> 
> unload all
> load kernel
> load -t dtb /boot/dtb/rockchip/rk3399-rockpro64.dtb
> boot -v
> 

El 2023-08-03 11:33, Archimedes Gaviola escribió:
> Hi,
> 
> Though I'm not familiar with your hardware but did you see something
> like umass*, pass* and da* for USB storage-related device drivers
> loaded upon kernel boot-up? I could be wrong but it seems like the
> root filesystem wasn't found because your USB storage driver is
> missing.
> 
> Thanks,
> Archimedes

-- 
José Pérez
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.