aarch64 (not armv7) kyua run on main [so: 14]: sys/net/if_lagg_test:status_stress got "Fatal data abort" panic

The context is on a Windows Dev Kit 2023, using a bectl based boot/root disk:

# uname -apKU
FreeBSD CA78C-WDK23-ZFS 14.0-CURRENT FreeBSD 14.0-CURRENT aarch64 1400094 #9 main-n264643-0befc55cdf4b-dirty: Wed Aug  9 14:23:48 PDT 2023     root@CA78C-WDK23-ZFS:/usr/obj/BUILDs/main-CA78C-dbg-clang/usr/main-src/arm64.aarch64/sys/GENERIC-DBG-CA78C arm64 aarch64 1400094 1400094

I only do bugzailla submittals based on just my
own builds as a means of last resort: I try to
use official builds for such. The:

main-n264491-8a5c836b51ce: Thu Aug  3

snapshot did not panic on the RPi4B that I
tried it with. We will see for the next
snapshot at some point.

Both the non-debug and the debug kernels panic.
I saw no evidence of the debug kernel reporting
anything.

Note the:

0xdeadc0dedeadc0de (2 examples)
and:
0xfefefefefefefeff (1 example)

that may have some significance.

. . .
sys/net/if_gif:basic  ->  passed  [0.195s]
sys/net/if_lagg_test:create  ->  passed  [0.125s]
sys/net/if_lagg_test:create_destroy_stress  ->  skipped: Skipping this test because it easily panics the machine  [0.022s]
sys/net/if_lagg_test:lacp_linkstate_destroy_stress  ->  passed  [60.048s]
sys/net/if_lagg_test:set_ether  ->  passed  [0.090s]
sys/net/if_lagg_test:status_stress  ->  

<6>lagg0: link state changed to DOWN
Fatal data abort:
  x0: 0xffff000186c82858 (_DYNAMIC + 0x271e46b8)
  x1: 0x0000000000000001
  x2: 0xdeadc0dedeadc0de
  x3: 0xffff0000005b68c0 (ifdead_ioctl + 0x0)
  x4: 0xffffa000a8ba305e
  x5: 0xffffa00023d932fa
  x6: 0x000000006767616c
  x7: 0x6e6d760070617401
  x8: 0x000000000000030c
  x9: 0x0000000000210005
 x10: 0x0000000000000800
 x11: 0xfefefefefefefeff
 x12: 0x0000000000000008
 x13: 0x0000000000000000
 x14: 0x0000000000010000
 x15: 0x0000000000000001
 x16: 0x0000000000010000
 x17: 0x0000000000000007
 x18: 0xffff000186c82520
<6>ue0: link state changed to DOWN
 (_DYNAMIC + 0x271e4380)
 x19: 0xffff000186c82858 (_DYNAMIC + 0x271e46b8)
 x20: 0xffffa000a8ba3000
 x21: 0xffffa000a8ba3058
 x22: 0x000000000000000c
 x23: 0x0000000000000005
 x24: 0x0000000000000000
 x25: 0xffff000000c7a000 (keysw + 0xb8)
 x26: 0x0000000000000000
 x27: 0xffff000000cf9000 (sdta_vfs_vop_vop_spare4_return1 + 0x18)
 x28: 0x0000000000000008
 x29: 0xffff000186c82540 (_DYNAMIC + 0x271e43a0)
  sp: 0xffff000186c82520
  lr: 0xffff0000006a0b50 (dump_iface + 0x2c0)
 elr: 0xffff0000006a124c (dump_sa + 0x1c)
spsr: 0x0000000000400045
 far: 0xdeadc0dedeadc0df
 esr: 0x0000000096000004
timeout stopping cpus
panic: vm_fault failed: 0xffff0000006a124c error 1
cpuid = 2
time = 1691642123
KDB: stack backtrace:
db_trace_self() at db_trace_self
db_trace_self_wrapper() at db_trace_self_wrapper+0x30
vpanic() at vpanic+0x13c
panic() at panic+0x44
data_abort() at data_abort+0x358
handle_el1h_sync() at handle_el1h_sync+0x14
--- exception, esr 0x96000004
dump_sa() at dump_sa+0x1c
dump_iface() at dump_iface+0x2bc
dump_cb() at dump_cb+0x18
if_foreach_sleep() at if_foreach_sleep+0x208
rtnl_handle_getlink() at rtnl_handle_getlink+0xec
rtnl_handle_message() at rtnl_handle_message+0x19c
nl_taskqueue_handler() at nl_taskqueue_handler+0x5f4
taskqueue_run_locked() at taskqueue_run_locked+0x1a4
taskqueue_thread_loop() at taskqueue_thread_loop+0xc8
fork_exit() at fork_exit+0x74
fork_trampoline() at fork_trampoline+0x14

This was from:

# /usr/bin/kyua test -k /usr/tests/Kyuafile

But the earlier part of the run is not
needed to get the panic. Booting, logging
in as root, and doing:

# /usr/bin/kyua test -k /usr/tests/Kyuafile sys/net/if_lagg_test:status_stress

is sufficient to get the panic in my context.


For reference for the RPi4B not getting the panic:

Trying on an RPi4B with a somewhat older snapshot did not panic:

# uname -apKU
you have mail
FreeBSD generic 14.0-CURRENT FreeBSD 14.0-CURRENT aarch64 1400093 #0 main-n264491-8a5c836b51ce: Thu Aug  3 12:10:50 UTC 2023     [email protected]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 aarch64 1400093 1400093

# /usr/bin/kyua test -k /usr/tests/Kyuafile sys/net/if_lagg_test:status_stress
sys/net/if_lagg_test:status_stress  ->  passed  [60.371s]

Results file id is usr_tests.20230804-151402-553517
Results saved to /root/.kyua/store/results.usr_tests.20230804-151402-553517.db

1/1 passed (0 failed)

===
Mark Millard
marklmi at yahoo.com