Re: USB-serial adapter suggestions needed

Mark Millard <[email protected]>
Newsgroups gmane.os.freebsd.devel.arm
Message-ID <[email protected]>
On Jan 12, 2024, at 09:25, bob prohaska <[email protected]> wrote:

> On Tue, Jan 09, 2024 at 05:03:42PM -0800, Mark Millard wrote:
>> 
>> www.zefox.org is the aarch64 that is not configured in config.txt
>> in the normal aarch64 manor. As I've requested before, please test
>> using a config.txt that instead has:
>> 
>> QUOTE
>> [all]
>> arm_64bit=1
>> dtparam=audio=on,i2c_arm=on,spi=on
>> dtoverlay=mmc
>> dtoverlay=disable-bt
>> device_tree_address=0x4000
>> kernel=u-boot.bin
>> 
>> [pi4]
>> hdmi_safe=1
>> armstub=armstub8-gic.bin
>> 
>> # Local addition:
>> [all]
>> force_mac_address=b8:27:eb:71:46:4f
>> END QUOTE
>> 
>> Please do not use a configuration based in part on armv7 FreeBSD
>> config.txt material any more for the testing activity: Just use
>> the FreeBSD normal aarch64 configuration with the force_mac_address
>> related material added at the end.
>> 
> 
> Just tried it now. The boot seems _extremely_ slow and invited 
> at least some intervention (manually typing run bootcmd_usb0
> at the u-boot prompt) but it did come up multi-user.

The above seems odd to me. What version of U-Boot is in use?
2023.10 tries TFTP before USB in U-Boot and the timeout sequence
totals to minutes. One can escape to the U-Boot> prompt early on
and:

U-Boot> bootefi bootmgr

in order to avoid the TFTP attempt if you are using 2023.10 .
I've not yet figured out how to have TFTP be tried only after
USB by default.

2023.10 does this for both forms of config.txt .

> It is able
> to function as a terminal server to nemesis.zefox.com, so I'll
> just watch it for a while. The netmap has been updated to reflect
> the change to config.txt.
> 
> An aside, none of the seven hosts has dropped a tip session over
> the past day or so, except when taken down intentionally. 
> 
>> I want to know if this also fails when powerd is not in
>> use anywhere.
>> 
> 
> For now powerd is off on all FreeBSD hosts, the Pi4 workstation
> is running something called upowerd as always. I'm thinking to
> eventualy re-start powerd on only a subset of hosts in hope that 
> will make behavioral differences more obvious.





===
Mark Millard
marklmi at yahoo.com
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.