https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=281726
Bug ID: 281726
Summary: USB device errors on Quartz64 Model A (RK3566)
Product: Base System
Version: CURRENT
Hardware: arm64
OS: Any
Status: New
Severity: Affects Only Me
Priority: ---
Component: arm
Assignee: [email protected]
Reporter: [email protected]
USB messages at g6e414739fc95
rk_usb2phy0: <Rockchip USB2PHY> mem 0xfe8a0000-0xfe8affff irq 76 on ofwbus0
Clock: clk_usbphy0_480m, parent: clk_usbphy0_ref(0), freq: 480000000
rk_usb2phy1: <Rockchip USB2PHY> mem 0xfe8b0000-0xfe8bffff irq 77 on ofwbus0
Clock: clk_usbphy1_480m, parent: clk_usbphy1_ref(0), freq: 480000000
snps_dwc3_fdt0: <Synopsys Designware DWC3> mem 0xfcc00000-0xfcffffff irq 10 on
ofwbus0
snps_dwc3_fdt0: SNPS Version: DWC3 (5533 300a)
snps_dwc3_fdt0: 64 bytes context size, 32-bit DMA
usbus0: trying to attach
usbus0 on snps_dwc3_fdt0
snps_dwc3_fdt0: usbpf: Attached
snps_dwc3_fdt1: <Synopsys Designware DWC3> mem 0xfd000000-0xfd3fffff irq 11 on
ofwbus0
snps_dwc3_fdt1: SNPS Version: DWC3 (5533 300a)
rk3568_combphy0: configuring for USB3 ref_clk=25000000
snps_dwc3_fdt1: 64 bytes context size, 32-bit DMA
usbus1: trying to attach
usbus1 on snps_dwc3_fdt1
snps_dwc3_fdt1: usbpf: Attached
ehci0: <Generic EHCI Controller> mem 0xfd800000-0xfd83ffff irq 13 on ofwbus0
usbus2: EHCI version 1.0
usbus2 on ehci0
ehci0: usbpf: Attached
ohci0: <Generic OHCI Controller> mem 0xfd840000-0xfd87ffff irq 14 on ofwbus0
usbus3 on ohci0
ohci0: usbpf: Attached
ehci1: <Generic EHCI Controller> mem 0xfd880000-0xfd8bffff irq 15 on ofwbus0
usbus4: EHCI version 1.0
usbus4 on ehci1
ehci1: usbpf: Attached
ohci1: <Generic OHCI Controller> mem 0xfd8c0000-0xfd8fffff irq 16 on ofwbus0
usbus5 on ohci1
ohci1: usbpf: Attached
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
usbus5: 12Mbps Full Speed USB v1.0
ugen3.1: <Generic OHCI root HUB> at usbus3
uhub0 on usbus3
uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <Generic EHCI root HUB> at usbus2
uhub1 on usbus2
uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen5.1: <Generic OHCI root HUB> at usbus5
uhub2 on usbus5
uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen4.1: <Generic EHCI root HUB> at usbus4
uhub3 on usbus4
uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen1.1: <Synopsys XHCI root HUB> at usbus1
uhub4 on usbus1
uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <Synopsys XHCI root HUB> at usbus0
uhub5 on usbus0
uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 1 port with 1 removable, self powered
uhub2: 1 port with 1 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub1: 1 port with 1 removable, self powered
uhub3: 1 port with 1 removable, self powered
usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_IOERROR
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_IOERROR
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_IOERROR
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_IOERROR
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_IOERROR
ugen3.2: <Unknown > at usbus3 (disconnected)
uhub_reattach_port: could not allocate new device
usbconfig with no USB devices connected reports:
# usbconfig
ugen3.1: <Generic OHCI root HUB> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE (0mA)
ugen2.1: <Generic EHCI root HUB> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE (0mA)
ugen5.1: <Generic OHCI root HUB> at usbus5, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE (0mA)
ugen4.1: <Generic EHCI root HUB> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE (0mA)
ugen1.1: <Synopsys XHCI root HUB> at usbus1, cfg=0 md=HOST spd=SUPER (5.0Gbps)
pwr=SAVE (0mA)
ugen0.1: <Synopsys XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps)
pwr=SAVE (0mA)
#
--
You are receiving this mail because:
You are the assignee for the bug.
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.