Re: Radxa Orion O6

On 1/23/25 08:02, FUKAUMI Naoki wrote:
> There are some delays between
> 
>    :
> ue0: link state changed to UP
> 
> here
> 
> ums0 on uhub3
> ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 1> on usbus4
> ums0: 16 buttons and [XYZT] coordinates ID=2
> 
> and here
> 
> Security policy loaded: MAC/ntpd (mac_ntpd)
>    :

Please ignore ^this. Userland is already running.

> ---<<BOOT>>---
   :
> pcib0: <Generic PCI host controller> on acpi0
> pcib0: Bus is cache-coherent
> pcib0: ECAM for bus 96-127 at mem 26000000-27ffffff
> pcib0: could not allocate memory.
> device_attach: pcib0 attach returned 6
> pcib0: <Generic PCI host controller> on acpi0
> pcib0: Bus is cache-coherent
> pcib0: ECAM for bus 48-79 at mem 23000000-24ffffff
> pcib0: could not allocate memory.
> device_attach: pcib0 attach returned 6
> pcib0: <Generic PCI host controller> on acpi0
> pcib0: Bus is cache-coherent
> pcib0: ECAM for bus 0-31 at mem 20000000-21ffffff
> pcib0: could not allocate memory.
> device_attach: pcib0 attach returned 6

PCIe is not configured in ACPI mode too.

> CPU  0: ARM Unknown CPU r0p1 (midr: 410fd811) affinity: 10  0
>                     Cache Type = <IDC,64 byte CWG,64 byte ERG,64 byte D- 
> cacheline,PIPT I-cache,64 byte I-cacheline,0x400000000>
>   Instruction Set Attributes 0 = <TLBI- 
> OSR,CondM-8.5,FHM,DP,SM4,SM3,SHA3,RDM,Atomic,CRC32,SHA2+SHA512,SHA1,AES+PMULL>
>   Instruction Set Attributes 1 = 
> <XS,I8MM,DGH,BF16,PredInv,SB,FRINTTS,RCPC-8.4,FCMA,JSCVT,DCCVADP>
>   Instruction Set Attributes 2 = <APA3 FPAC+Combined,GPA3,Unknown 
> WFxT(2),0x1000000>
>           Processor Features 0 = 
> <CSV3,CSV2_2,PSTATE.DIT,AMUv1,MPAM,SEL2,SVE,RAS v8.4,GIC 
> 4.1,AdvSIMD+HP,FP+HP,EL3,EL2,EL1,EL0>
>           Processor Features 1 = <MPAM p1,MTE3,PSTATE.SSBS MSR,BTI>
>           Processor Features 2 = <>
>        Memory Model Features 0 = <ECV+CNTHCTL,FGT,S2 TGran4,S2 
> TGran64,S2 TGran16,TGran4,TGran64,TGran16,SNSMem,BigEnd,16bit ASID,1TB PA>
>        Memory Model Features 1 = <nTLBPA,AFP,HCX,ETS,XNX,Unknown 
> PAN(3),LO,HPD+TTPBHA,VH,16bit VMID,HAF+DS,0x1000000000000000>
>        Memory Model Features 2 = <E0PD,EVT-8.5,BBM level 
> 2,TTL,FWB,IDS,AT,ST,64bit CCIDX,48bit VA,IESB,UAO,CnP>
>        Memory Model Features 3 = <>
>        Memory Model Features 4 = <>
>               Debug Features 0 = <HPMN0,MTPMU res0,TraceBuffer,Trace 
> v8.4,SPEv1p2,2 CTX BKPTs,4 Watchpoints,6 
> Breakpoints,PMUv3p7,Trace,Debugv8p4>
>               Debug Features 1 = <>
>           Auxiliary Features 0 = <>
>           Auxiliary Features 1 = <>
>                 SVE Features 0 = 
> <I8MM,SM4,SHA3,BF16,BitPerm,AES+PMULL,SVE2>
> AArch32 Instruction Set Attributes 5 = <>
> AArch32 Media and VFP Features 0 = <>
> AArch32 Media and VFP Features 1 = <>
>   L1 cache: 0KB (instruction), 0KB (data)
>   L2 cache: 0KB (unified)
>   L3 cache: 0KB (unified)

Cache size is not detected properly.

$ sysctl dev.cpu.0
dev.cpu.0.cx_usage_counters: 0
dev.cpu.0.cx_usage: 0.00% last 1000000us
dev.cpu.0.cx_lowest: C8
dev.cpu.0.cx_supported: C1/1/0
dev.cpu.0.%iommu:
dev.cpu.0.%parent: acpi0
dev.cpu.0.%pnpinfo: _HID=ACPI0007 _UID=0 _CID=none
dev.cpu.0.%location: handle=\_SB_.CPU0
dev.cpu.0.%driver: cpu
dev.cpu.0.%desc: ACPI CPU

cpufreq is not available.

Best regards,

--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.