arm64 dead on boot / "Synchronous Abort" handler, esr 0x02000000

"Bjoern A. Zeeb" <[email protected]>
Newsgroups gmane.os.freebsd.devel.arm
Message-ID <[email protected]>
Hi,

I updated my arm64 tree from beginning of Feb to today and I am gettig as
far as "Loading splash ok" (I am netbooting):

OK boot -v
Loading kernel...
/boot/kernel/kernel text=0x318 text=0x9a04f8 text=0x2cba18 data=0x180af0 data=0x0+0x371000 0x8+0x170778+0x8+0x1a1e2c-
Loading configured modules...
can't find '/etc/hostid'
can't find '/boot/entropy'
Using DTB provided by EFI at 0x3e6c2000.
Loading splash ok


After the reboot I checked in loader how console got set:
console=efi,comconsole

This time it still stayed blank but rebooted by itself after a few
seconds.

OK set console=comconsole
OK boot -v
Using DTB provided by EFI at 0x3e6c3000.
Loading splash ok

and that also just rebooted itself again.


Then I went to laoder_4th,efi to check that:

and I got the nice blue "Booting..."

OK boot -v
Booting...
Using DTB provided by EFI at 0x3e6a3000.
Loading splash ok

But nothing else either.


Another few tries later I managed to catch this:

OK boot
Using DTB provided by EFI at 0x3e6c2000.
Loading splash ok
"Synchronous Abort" handler, esr 0x02000000
elr: fffffffff6ad99ec lr : fffffffff6ad980c (reloc)
elr: 00000000366009ec lr : 000000003660080c
x0 : ffff000001611000 x1 : 000000000161b000
x2 : 0000000030c50830 x3 : 00000000365ed000
x4 : 0000000000000ec8 x5 : 000000003fb20000
x6 : 000000107d201000 x7 : 000000107d200000
x8 : 000000009444c004 x9 : 0000000000000000
x10: 0000000000000000 x11: 0000000000000000
x12: 6e757420fe006174 x13: 0100031f00ff0003
x14: 000000003c8d9c00 x15: 0000000000000000
x16: 0000000000000540 x17: 0000000000000470
x18: 000000003f722dd0 x19: 0000000036600800
x20: 0000000036600000 x21: 000000003c8d1c10
x22: 000000003e68cd0b x23: 0000000000000008
x24: 000000003e69b888 x25: 000000003e6b4ad0
x26: 0000000000000060 x27: 000000003e69bef8
x28: 00000000010000c4 x29: 000000003e6af960

Code: 01030000 00080000 00000000 00000000 (00000004)
Resetting CPU ...

resetting ...

-- 
Bjoern A. Zeeb                                                     r15:7
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.