Re: How to activate HDMI output with FreeBSD running on a CM3+?

"Patrick M. Hausen" <[email protected]>
Newsgroups gmane.os.freebsd.devel.arm
Message-ID <[email protected]> 
Am 12.06.2025 um 19:38 schrieb Patrick M. Hausen <[email protected]>:
> 
> Hi
> 
>> Am 12.06.2025 um 19:24 schrieb Karl Denninger <[email protected]>:
>> Is the connector plugged in (not necessarily the monitor, but the cable -- and sometimes the monitor too!) when the unit is first powered?
> 
> Yes, I rebooted multiple times with the monitor (KVM) connected.
> 
> Thinking about it - maybe the KVM is power cycled when I reboot the Pi.
> I'll check that - at least in the Linux docs there seems to be another config.txt
> setting to always enable the HDMI port.
> 
> Or I an try an external power supply.

Separate power supply now, HDMI definitely connected, no success.

The additional config.txt line is supposed to be:

hdmi_force_hotplug=1

Does not change anything.

Kind regards,
Patrick
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.