Re: How to boot FreeBSD installed on the sd card on the Khadas Edge-V instead of Android
Klaus Küchemann <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.arm |
|---|---|
| Message-ID | <[email protected]> |
Here's roughly how it works: follow the instructions of your vendor to get into Mask Mode 1. Delete the SPI flash or install the u-boot port on it. (Instructions in the pkg description) 2. Delete the emmc or install FreeBSD on it. -- In short: if you have the u-boot port flashed onto the SPI, deleted the emmc, and FreeBSD on the uSD, FreeBSD will boot. -- I don't own a Khadas board and don't want to destroy yours, so I don't want to reveal the trick for shorting the SPI pins to interrupt detection during boot :-) Have fun > Am 06.07.2025 um 14:40 schrieb Mario Marietto <[email protected]>: > Khadas Edge-V