Re: How to boot FreeBSD installed on the sd card on the Khadas Edge-V instead of Android

Mario Marietto <[email protected]>
Newsgroups gmane.os.freebsd.devel.arm
Message-ID <CA+1FSijAXWK8VX2tLO8-c25JPMxgFCe6LicFh1DJ4y_4jN8HMQ@mail.gmail.com>
It happens mostly because the necessary source of informations that could
help me to make progress don't work on the khadas website :

1) https://dl.khadas.com/Firmware/Krescue/system/ : broken

2) docs.khadas.com : broken

3) https://youtu.be/ml2e6w8msfk : broken

--> follow the instructions of your vendor to get into Mask Mode : where ?

--> 1. Delete the SPI flash or install the u-boot port on it. (Instructions
in the pkg description) : where ?

--> 2. Delete the emmc or install FreeBSD on it : no idea about how to do
this

--> In short: if you have the u-boot port flashed onto the SPI, deleted the
emmc, and FreeBSD on the uSD, FreeBSD will boot : too generic.

--> so I don't want to reveal the trick for shorting the SPI pins to
interrupt detection during boot.

If it is about to touch some pins with a tweezer, I will not do it. I see
different methods to achieve this result. Why have you suggested the most
dangerous for a newbie ?

On Sun, Jul 6, 2025 at 9:59 PM Mario Marietto <[email protected]>
wrote:

> Hello Klaus,
>
> Thanks for your help.
>
> I would like to inform you that your help hasn't been able to help me to
> make any progress. Sorry to tell you this,but this is the truth. You have
> been too generic for my level of knowledge.
> If you want to really help me,try to be more specific.
>
> Very thanks.
>
> On Sun, Jul 6, 2025 at 9:52 PM Klaus Küchemann <[email protected]>
> wrote:
>
>> Here's roughly how it works:
>>
>> follow the instructions of your vendor to get into Mask Mode
>> 1. Delete the SPI flash or install the u-boot port on it. (Instructions
>> in the pkg description)
>> 2. Delete the emmc or install FreeBSD on it.
>> -- In short: if you have the u-boot port flashed onto the SPI, deleted
>> the emmc, and FreeBSD on the uSD, FreeBSD will boot.
>>
>> --
>> I don't own a Khadas board and don't want to destroy yours,
>> so I don't want to reveal the trick for shorting the SPI pins to
>> interrupt detection during boot :-)
>>
>> Have fun
>>
>>
>>
>> > Am 06.07.2025 um 14:40 schrieb Mario Marietto <[email protected]>:
>> > Khadas Edge-V
>>
>
>
> --
> Mario.
>


-- 
Mario.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.