Re: OrangePI 5 Plus support status

On Sun, Jul 20, 2025, 8:08 PM Nenhum_de_Nos <[email protected]> wrote:

> Hi,
>
> I am trying to make opnsense run on the OrangePi 5 Plus, but using 14.2R I
> cannot boot from nvme or sdcard. Both cases the boot starts but fails on
> mounting root, and issuing "?" tells me no storage is available.
>
> Has anyone any experience on this? I found quite no information for this
> board. If anyone have any hints or need testing, I can help :)
>
> I am trying both u-boot and edk2. The board is fine, OpenBSD works, both
> nvme and the two realtek nic's. 14.2R boots when I try USB adapter for the
> sdcard, but no NIC shows.
>
> Bellow is dmesg and pciconv -lv for it.
>
>
> FreeBSD 15.0-CURRENT (GENERIC) #0 main-n278845-c19877b03f8c: Thu Jul 17
> 22:55:22 UTC 2025
>
> Welcome to FreeBSD!
>
> Release Notes, Errata: https://www.FreeBSD.org/releases/
> Security Advisories:   https://www.FreeBSD.org/security/
> FreeBSD Handbook:      https://www.FreeBSD.org/handbook/
> FreeBSD FAQ:           https://www.FreeBSD.org/faq/
> Questions List:        https://www.FreeBSD.org/lists/questions/
> FreeBSD Forums:        https://forums.FreeBSD.org/
>
> Documents installed with the system are in the
> /usr/local/share/doc/freebsd/
> directory, or can be installed later with:  pkg install en-freebsd-doc
> For other languages, replace "en" with a language code like de or fr.
>
> Show the version of FreeBSD installed:  freebsd-version ; uname -a
> Please include that output and any error messages when posting questions.
> Introduction to manual pages:  man man
> FreeBSD directory layout:      man hier
>
> To change this login announcement, see motd(5).
> "man ports" gives many useful hints about installing FreeBSD ports.
> matheus@orangepi5plus:~ $ dmesg
> ---<<BOOT>>---
> GDB: debug ports: uart
> GDB: current port: uart
> KDB: debugger backends: ddb gdb
> KDB: current backend: ddb
> Copyright (c) 1992-2025 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 15.0-CURRENT #0 main-n278845-c19877b03f8c: Thu Jul 17 22:55:22 UTC
> 2025
>     [email protected]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC
> arm64
> FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git
> llvmorg-19.1.7-0-gcd708029e0b2)
> WARNING: WITNESS option enabled, expect reduced performance.
> VT(efifb): resolution 640x480
> real memory  = 16879779840 (16097 MB)
> avail memory = 16476590080 (15713 MB)
> Starting CPU 1 (100)
> Starting CPU 2 (200)
> Starting CPU 3 (300)
> Starting CPU 4 (400)
> Starting CPU 5 (500)
> Starting CPU 6 (600)
> Starting CPU 7 (700)
> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
> random: unblocking device.
> random: entropy device external interface
> kbd0 at kbdmux0
> acpi0: <RKCP RK3588>
> acpi0: Power Button (fixed)
> acpi0: Could not update all GPEs: AE_NOT_CONFIGURED
> psci0: <ARM Power State Co-ordination Interface Driver> on acpi0
> smccc0: <ARM SMCCC v1.5> on psci0
> gic0: <ARM Generic Interrupt Controller v3.0> iomem
> 0xfe600000-0xfe60ffff,0xfe680000-0xfe77ffff on acpi0
> generic_timer0: <ARM Generic Timer> irq 29,30,31,32 on acpi0
> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
> efirtc0: <EFI Realtime Clock>
> efirtc0: registered as a time-of-day clock, resolution 1.000000s
> smbios0: <System Management BIOS>
> smbios0: Entry point: v3 (64-bit), Version: 3.3
> pmu0: <Performance Monitoring Unit> on acpi0
> pcib0: <Generic PCI host controller> on acpi0
> pci0: <ACPI PCI bus> on pcib0
> nvme0: <Generic NVMe Device> mem
> 0xf0000000-0xf0003fff,0xf0004000-0xf0005fff at device 0.0 on pci0
> nvme0: unable to allocate MSI-X
> nvme0: unable to allocate MSI
> pcib1: <Generic PCI host controller> on acpi0
> pci1: <ACPI PCI bus> on pcib1
> pcib2: <Generic PCI host controller> on acpi0
> pci2: <ACPI PCI bus> on pcib2
> pci2: <network, ethernet> at device 0.0 (no driver attached)
> pcib3: <Generic PCI host controller> on acpi0
> pci3: <ACPI PCI bus> on pcib3
> pci3: <network, ethernet> at device 0.0 (no driver attached)
> uart0: <16750 or compatible> iomem 0xfeb50000-0xfeb50fff irq 21 on acpi0
> uart0: console (1500000,n,8,1)
> ehci0: <Generic EHCI Controller> iomem 0xfc800000-0xfc83ffff irq 23 on
> acpi0
> usbus0: EHCI version 1.0
> usbus0 on ehci0
> ehci1: <Generic EHCI Controller> iomem 0xfc880000-0xfc8bffff irq 24 on
> acpi0
> usbus1: EHCI version 1.0
> usbus1 on ehci1
> xhci0: <Generic USB 3.0 controller> iomem 0xfc000000-0xfc3fffff irq 27 on
> acpi0
> xhci0: 64 bytes context size, 32-bit DMA
> usbus2 on xhci0
> xhci1: <Generic USB 3.0 controller> iomem 0xfc400000-0xfc7fffff irq 28 on
> acpi0
> xhci1: 64 bytes context size, 32-bit DMA
> usbus3 on xhci1
> cpu0: <ACPI CPU> on acpi0
> armv8crypto0: <AES-CBC,AES-XTS,AES-GCM>
> Timecounters tick every 1.000 msec
> usbus0: 480Mbps High Speed USB v2.0
> usbus1: 480Mbps High Speed USB v2.0
> usbus2: 5.0Gbps Super Speed USB v3.0
> usbus3: 5.0Gbps Super Speed USB v3.0
> ugen1.1: <Generic EHCI root HUB> at usbus1
> uhub0 on usbus1
> uhub0: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
> ugen0.1: <Generic EHCI root HUB> at usbus0
> uhub1 on usbus0
> uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
> ugen3.1: <Generic XHCI root HUB> at usbus3
> uhub2 on usbus3
> uhub2: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3
> ugen2.1: <Generic XHCI root HUB> at usbus2
> uhub3 on usbus2
> uhub3: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> nvme0: Allocated 64MB host memory buffer
> CPU  0: ARM Cortex-A55 r2p0 affinity:  0  0
>                    Cache Type = <64 byte CWG,64 byte ERG,64 byte
> D-cacheline,VIPT I-cache,64 byte I-cacheline>
>  Instruction Set Attributes 0 = <DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL>
>  Instruction Set Attributes 1 = <RCPC-8.3,DCPoP>
>  Instruction Set Attributes 2 = <>
>          Processor Features 0 = <RAS,GIC,AdvSIMD+HP,FP+HP,EL3 32,EL2
> 32,EL1 32,EL0 32>
>          Processor Features 1 = <MTE_frac,PSTATE.SSBS>
>          Processor Features 2 = <>
>       Memory Model Features 0 =
> <TGran4,TGran64,TGran16,SNSMem,BigEnd,16bit ASID,1TB PA>
>       Memory Model Features 1 = <XNX,PAN+ATS1E1,LO,HPD+TTPBHA,VH,16bit
> VMID,HAF+DS>
>       Memory Model Features 2 = <32bit CCIDX,48bit VA,IESB,UAO,CnP>
>       Memory Model Features 3 = <>
>       Memory Model Features 4 = <>
>              Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6
> Breakpoints,PMUv3p1,Debugv8p2>
>              Debug Features 1 = <>
>          Auxiliary Features 0 = <>
>          Auxiliary Features 1 = <>
> AArch32 Instruction Set Attributes 5 = <RDM,CRC32,SHA2,SHA1,AES+VMULL,SEVL>
> AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP
> VFPv3+v4,AdvSIMD>
> AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP Arith,SIMDHP
> Arith,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ>
> CPU  1: ARM Cortex-A55 r2p0 affinity:  1  0
> CPU  2: ARM Cortex-A55 r2p0 affinity:  2  0
> CPU  3: ARM Cortex-A55 r2p0 affinity:  3  0
> CPU  4: ARM Cortex-A76 r4p0 affinity:  4  0
>                    Cache Type = <IDC,64 byte CWG,64 byte ERG,64 byte
> D-cacheline,PIPT I-cache,64 byte I-cacheline>
>          Processor Features 0 =
> <CSV3,CSV2,RAS,GIC,AdvSIMD+HP,FP+HP,EL3,EL2,EL1,EL0 32>
> CPU  5: ARM Cortex-A76 r4p0 affinity:  5  0
> CPU  6: ARM Cortex-A76 r4p0 affinity:  6  0
> CPU  7: ARM Cortex-A76 r4p0 affinity:  7  0
> gic0: using for IPIs
> Release APs...done
> TCP_ratelimit: Is now initialized
> Trying to mount root from zfs:zroot/ROOT/default []...
> WARNING: WITNESS option enabled, expect reduced performance.
> nda0 at nvme0 bus 0 scbus0 target 0 lun 1
> nda0: <ADATA LEGEND 710 VC2SAD01 2O292L177N1L>
> nda0: Serial Number 2O292L177N1L
> nda0: nvme version 1.4
> nda0: 244198MB (500118192 512 byte sectors)
> uhub3: 2 ports with 2 removable, self powered
> uhub2: 2 ports with 2 removable, self powered
> uhub1: 1 port with 1 removable, self powered
> uhub0: 1 port with 1 removable, self powered
> ugen3.2: <GenesysLogic USB2.1 Hub> at usbus3
> uhub4 on uhub2
> uhub4: <GenesysLogic USB2.1 Hub, class 9/0, rev 2.10/93.91, addr 1> on
> usbus3
> uhub4: MTT enabled
> uhub4: 4 ports with 4 removable, self powered
> Root mount waiting for: usbus3
> ugen3.3: <GenesysLogic USB3.2 Hub> at usbus3
> uhub5 on uhub2
> uhub5: <GenesysLogic USB3.2 Hub, class 9/0, rev 3.20/93.91, addr 2> on
> usbus3
> uhub5: 4 ports with 4 removable, self powered
> Root mount waiting for: usbus3
> ugen3.4: <ASIX Elec. Corp. AX88179> at usbus3
> lo0: link state changed to UP
> axge0 on uhub5
> axge0: <ASIX Elec. Corp. AX88179, rev 3.00/1.00, addr 3> on usbus3
> miibus0: <MII bus> on axge0
> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 3 on miibus0
> rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master,
> 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
> ue0: <USB Ethernet> on axge0
>

So it looks like it mounted root, then found the nvme card. What foes gpart
show nda0 reveal? Can you dd the first 100mb? What's the data rate?

Warner


nvme0@pci0:1:0:0:       class=0x010802 rev=0x01 hdr=0x00 vendor=0x1cc1
> device=0x5766 subvendor=0x1cc1 subdevice=0x0000
>     vendor     = 'ADATA Technology Co., Ltd.'
>     device     = 'XPG GAMMIXS1 1L, XPG GAMMIX S5, LEGEND 710 / 740,
> SWORDFISH NVMe SSD (DRAM-less)'
>     class      = mass storage
>     subclass   = NVM
> none0@pci3:1:0:0:       class=0x020000 rev=0x05 hdr=0x00 vendor=0x10ec
> device=0x8125 subvendor=0x10ec subdevice=0x8125
>     vendor     = 'Realtek Semiconductor Co., Ltd.'
>     device     = 'RTL8125 2.5GbE Controller'
>     class      = network
>     subclass   = ethernet
> none1@pci4:1:0:0:       class=0x020000 rev=0x05 hdr=0x00 vendor=0x10ec
> device=0x8125 subvendor=0x10ec subdevice=0x8125
>     vendor     = 'Realtek Semiconductor Co., Ltd.'
>     device     = 'RTL8125 2.5GbE Controller'
>     class      = network
>     subclass   = ethernet
>
>
>
> ------------
> "We will call you Cygnus,
> The God of balance you shall be."
>
>