svn commit: r45451 - in head/en_US.ISO8859-1/books/porters-handbook: special uses
Mathieu Arnold <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.cvs.doc |
|---|---|
| Message-ID | <[email protected]> |
Author: mat (ports committer)
Date: Thu Aug 14 06:30:44 2014
New Revision: 45451
URL: http://svnweb.freebsd.org/changeset/doc/45451
Log:
Catch up with last months updates in ports/Mk/Uses.
Reviewed by: wblock, antoine
Sponsored by: Absolight
Differential Revision: https://phabric.freebsd.org/D534
Modified:
head/en_US.ISO8859-1/books/porters-handbook/special/chapter.xml
head/en_US.ISO8859-1/books/porters-handbook/uses/chapter.xml
Modified: head/en_US.ISO8859-1/books/porters-handbook/special/chapter.xml
==============================================================================
--- head/en_US.ISO8859-1/books/porters-handbook/special/chapter.xml Wed Aug 13 22:48:26 2014 (r45450)
+++ head/en_US.ISO8859-1/books/porters-handbook/special/chapter.xml Thu Aug 14 06:30:44 2014 (r45451)
@@ -489,19 +489,13 @@ IGNORE= may not be redistributed because
<command>make</command> implementation expected by the
ported software.</para>
- <para>If your port is an X application that creates
- <filename>Makefile</filename> files from
- <filename>Imakefile</filename> files using
- <application>imake</application>, then set
- <literal>USES= imake</literal>. This will cause the
- configure stage to automatically do an
- <command>xmkmf -a</command>. If the <option>-a</option>
- flag is a problem for your port, set
- <literal>XMKMF=xmkmf</literal>. If the port uses
- <application>imake</application> but does not understand the
- <buildtarget>install.man</buildtarget> target,
- <literal>NO_INSTALL_MANPAGES=yes</literal> should be
- set.</para>
+ <para>If the port is an X application that uses
+ <application>imake</application> to create
+ <filename>Makefile</filename>s from
+ <filename>Imakefile</filename>s, set <literal>USES=
+ imake</literal>.. See the <link
+ linkend="uses-imake"><literal>USES=imake</literal></link>
+ section of <xref linkend="uses"/> for more details.</para>
<para>If your port's source <filename>Makefile</filename> has
something else than <buildtarget>all</buildtarget> as the
@@ -816,13 +810,9 @@ CMAKE_SOURCE_PATH= ${WRKSRC}/subp
libtool (search for a file named ltmain.sh) need to have
<literal>USES=libtool</literal>. Also, if a port has
<literal>USE_AUTOTOOLS=libtoolize</literal> it probably also
- needs <literal>USES=libtool</literal>.</para>
+ needs <literal>USES=libtool</literal>. See the <link linkend="uses-libtool">USES=libtool</link>
+ section in <xref linkend="uses"/> for more details.</para>
- <para>Some ports do not ship with their own copy of libtool and
- expect libtool to be provided by the build system. In that
- case simply add:</para>
-
- <programlisting>BUILD_DEPENDS= libtool:${PORTSDIR}/devel/libtool.</programlisting>
</sect2>
<sect2 xml:id="using-libltdl">
Modified: head/en_US.ISO8859-1/books/porters-handbook/uses/chapter.xml
==============================================================================
--- head/en_US.ISO8859-1/books/porters-handbook/uses/chapter.xml Wed Aug 13 22:48:26 2014 (r45450)
+++ head/en_US.ISO8859-1/books/porters-handbook/uses/chapter.xml Thu Aug 14 06:30:44 2014 (r45451)
@@ -8,6 +8,8 @@
<!--
+ Document up-to date with r364718 revision of the ports tree.
+
This file documents the values of the USES make variable. The
format is easy to grasp from the already-added entries below (or use
this scheme below as a skeleton):
@@ -45,11 +47,13 @@
<row xml:id="uses-ada">
<entry><literal>ada</literal></entry>
- <entry>(none)</entry>
+ <entry>(none), <literal>47</literal></entry>
<entry>Depends on an <application>Ada</application>-capable
- compiler, and sets <varname>CC</varname>
- accordingly.</entry>
+ compiler, and sets <varname>CC</varname> accordingly.
+ Defaults to a <application>gcc</application> 4.9 based
+ compiler, use <literal>:47</literal> to use the older
+ <application>gcc</application> 4.7 based one.</entry>
</row>
<row xml:id="uses-bison">
@@ -101,13 +105,16 @@
<entry>(none), <literal>c++0x</literal>,
<literal>c++11-lang</literal>,
+ <literal>gcc-c++11-lib</literal>,
<literal>c++11-lib</literal>, <literal>c11</literal>,
<literal>openmp</literal>, <literal>nestedfct</literal>,
<literal>features</literal></entry>
<entry>Determines which compiler to use based on any given
wishes. Use <literal>c++11-lang</literal> if the port
- needs a C++11-capable compiler, and
+ needs a C++11-capable compiler,
+ <literal>gcc-c++11-lib</literal> if the port needs the
+ <command>g++</command> compiler with a C++11 library, and
<literal>c++11-lib</literal> if the port also needs a
C++11-ready standard library. If the port needs a
compiler understanding C++0X, C11, OpenMP, or nested
@@ -329,6 +336,33 @@
</itemizedlist></entry>
</row>
+ <row xml:id="uses-drupal">
+ <entry><literal>drupal</literal></entry>
+
+ <entry><literal>6</literal>, <literal>7</literal>,
+ <literal>module</literal>,
+ <literal>theme</literal></entry>
+
+ <entry>Automate installation of a port that is a
+ <application>Drupal</application>
+ theme or module. Use with the version of Drupal that the
+ port is expecting. For example,
+ <literal>USES=drupal:6,module</literal> says that this
+ port creates a Drupal 6 module. A Drupal 7 theme can be
+ specified with
+ <literal>USES=drupal:7,theme</literal>.</entry>
+ </row>
+
+ <row xml:id="uses-execinfo">
+ <entry><literal>execinfo</literal></entry>
+
+ <entry>(none)</entry>
+
+ <entry>Add a runtime dependency on
+ <filename>libexecinfo.so</filename> depending on its
+ presence in the base system.</entry>
+ </row>
+
<row xml:id="uses-fam">
<entry><literal>fam</literal></entry>
@@ -370,6 +404,28 @@
version of &os;.</entry>
</row>
+ <row xml:id="uses-gecko">
+ <entry><literal>gecko</literal></entry>
+
+ <entry><literal>libxul</literal> (default),
+ <literal>firefox</literal>, <literal>seamonkey</literal>,
+ <literal>thunderbird</literal>, <literal>build</literal>,
+ <literal><replaceable>XY</replaceable></literal>,
+ <literal><replaceable>XY</replaceable>+</literal></entry>
+
+ <entry>Add a dependency on different
+ <application>gecko</application> based applications. If
+ <literal>libxul</literal> is used, it is the only argument
+ allowed. When the argument is not
+ <literal>libxul</literal>, the <literal>firefox</literal>,
+ <literal>seamonkey</literal>, or
+ <literal>thunderbird</literal> arguments can be used,
+ along with optional <literal>build</literal> and
+ <literal><replaceable>XY</replaceable></literal>/<literal><replaceable>XY</replaceable>+</literal>
+ version
+ arguments.</entry>
+ </row>
+
<row xml:id="uses-gettext">
<entry><literal>gettext</literal></entry>
@@ -388,9 +444,11 @@
<row xml:id="uses-gmake">
<entry><literal>gmake</literal></entry>
- <entry>(none)</entry>
+ <entry>(none), <literal>lite</literal></entry>
- <entry>Uses <package role="port">devel/gmake</package> as a
+ <entry>Uses <package role="port">devel/gmake</package>, or
+ <package role="port">devel/gmake-lite</package> if the
+ <literal>lite</literal> argument is used, as a
build-time dependency and sets up the environment to use
<command>gmake</command> as the default
<command>make</command> for the build.</entry>
@@ -494,7 +552,8 @@ GSSAPI_NONE_CONFIGURE_ON= --without-gssa
<entry>(none), <literal>lib</literal>,
<literal>build</literal>,
- <literal>patch</literal></entry>
+ <literal>patch</literal>, <literal>translit</literal>,
+ <literal>wchar_t</literal></entry>
<entry>Uses <command>iconv</command> functions, either from
the port
@@ -507,7 +566,11 @@ GSSAPI_NONE_CONFIGURE_ON= --without-gssa
implies <command>iconv</command> with build-time and
run-time dependencies. <literal>build</literal> implies a
build-time dependency, and <literal>patch</literal>
- implies a patch-time dependency. For more information see
+ implies a patch-time dependency. If the port uses the
+ <literal>WCHAR_T</literal> or
+ <literal>//TRANSLIT</literal> iconv extensions, add the
+ relevant arguments so that the correct iconv is used. For
+ more information see
<xref linkend="using-iconv"/>.</entry>
</row>
@@ -515,14 +578,19 @@ GSSAPI_NONE_CONFIGURE_ON= --without-gssa
<entry><literal>imake</literal></entry>
<entry>(none), <literal>env</literal>,
- <literal>notall</literal></entry>
+ <literal>notall</literal>,
+ <literal>noman</literal></entry>
- <entry>Uses <package role="port">devel/imake</package> as
- build-time dependency. If the <literal>env</literal>
- argument is given, only setup the environment and do not
- define any target. If the <literal>notall</literal>
- argument is given does not pass <literal>-a</literal> to
- <command>xmkmf</command>.</entry>
+ <entry>Add <package role="port">devel/imake</package> as a
+ build-time dependency and run <command>xmkmf -a</command>
+ during the <buildtarget>configure</buildtarget> stage. If
+ the <literal>env</literal> argument is given, the
+ <buildtarget>configure</buildtarget> target is not set.
+ If the <option>-a</option> flag is a problem for the port,
+ add the <literal>notall</literal> argument. If
+ <command>xmkmf</command> does not generate a
+ <buildtarget>install.man</buildtarget> target, add the
+ <literal>noman</literal> argument.</entry>
</row>
<row xml:id="uses-kmod">
@@ -584,29 +652,49 @@ GSSAPI_NONE_CONFIGURE_ON= --without-gssa
<row xml:id="uses-libtool">
<entry><literal>libtool</literal></entry>
- <entry>(none)</entry>
+ <entry>(none), <literal>keepla</literal>,
+ <literal>build</literal></entry>
<entry>Patches <command>libtool</command> scripts. This
should be added to all ports that use
- <command>libtool</command>.</entry>
+ <command>libtool</command>. The <literal>keepla</literal>
+ argument can be used to keep the <filename>.la</filename>
+ files. Some ports do not ship with their own copy of
+ libtool and need a build time dependency on <package
+ role="port">devel/libtool</package>, use the
+ <literal>:build</literal> argument to add such
+ dependency.</entry>
</row>
<row xml:id="uses-lua">
<entry><literal>lua</literal></entry>
- <entry>(none), <literal>XY+</literal>,
- <literal>XY</literal>, <literal>build</literal>,
+ <entry>(none),
+ <literal><replaceable>XY</replaceable>+</literal>,
+ <literal><replaceable>XY</replaceable></literal>,
+ <literal>build</literal>,
<literal>run</literal></entry>
<entry>Adds a dependency on <application>Lua</application>.
By default this is a library undependency, unless
overridden by the <literal>build</literal> or
<literal>run</literal> option. The default version is
- 5.2, unless set by the <literal>XY</literal> parameter
+ 5.2, unless set by the
+ <literal><replaceable>XY</replaceable></literal> parameter
(e.g., <literal>51</literal> or
<literal>52+</literal>).</entry>
</row>
+ <row xml:id="uses-makeinfo">
+ <entry><literal>makeinfo</literal></entry>
+
+ <entry><literal>build</literal> (default),
+ <literal>run</literal>, <literal>both</literal></entry>
+
+ <entry>Add the corresponding dependencies on
+ <command>makeinfo</command>.</entry>
+ </row>
+
<row xml:id="uses-makeself">
<entry><literal>makeself</literal></entry>
@@ -660,6 +748,15 @@ GSSAPI_NONE_CONFIGURE_ON= --without-gssa
for verbose output.</entry>
</row>
+ <row xml:id="uses-objc">
+ <entry><literal>objc</literal></entry>
+
+ <entry>(none)</entry>
+
+ <entry>Add objective C dependencies (compiler, runtime
+ library) if the base system does not support it.</entry>
+ </row>
+
<row xml:id="uses-openal">
<entry><literal>openal</literal></entry>
@@ -683,7 +780,10 @@ GSSAPI_NONE_CONFIGURE_ON= --without-gssa
<entry>Look for the <filename>Makefile.in</filename> and
<filename>configure</filename> files in the port's
associated sources and fix common paths to make sure they
- respect the &os; hierarchy.</entry>
+ respect the &os; hierarchy. If the port uses
+ <command>automake</command>, set
+ <varname>PATHFIX_MAKEFILEIN</varname> to
+ <filename>Makefile.am</filename> if needed.</entry>
</row>
<row xml:id="uses-perl5">
@@ -746,9 +846,10 @@ GSSAPI_NONE_CONFIGURE_ON= --without-gssa
<row xml:id="uses-pgsql">
<entry><literal>pgsql</literal></entry>
- <entry>(none), <literal>X.Y</literal>,
- <literal>X.Y+</literal>,
- <literal>X.Y-</literal></entry>
+ <entry>(none),
+ <literal><replaceable>X.Y</replaceable></literal>,
+ <literal><replaceable>X.Y</replaceable>+</literal>,
+ <literal><replaceable>X.Y</replaceable>-</literal></entry>
<entry>
<para>Provide support for PostgreSQL. Maintainer can
@@ -864,30 +965,35 @@ GSSAPI_NONE_CONFIGURE_ON= --without-gssa
<filename>/usr/bin/perl</filename> and
<filename>/bin/bash</filename>. This fixes shebang lines
in scripts listed in <varname>SHEBANG_FILES</varname>.
- Currently <application>Perl</application>,
+ Currently <application>Bash</application>,
+ <application>Java</application>,
+ <application>Perl</application>,
+ <application>PHP</application>,
<application>Python</application>,
- <application>Bash</application>,
- <application>Ruby</application>, and
- <application>PHP</application> are supported by default.
+ <application>Ruby</application>,
+ <application>Tcl</application>, and
+ <application>Tk</application> are supported by default.
To support another interpreter, set
- <varname>SHEBANG_LANG</varname> (for example
- <literal>SHEBANG_LANG=lua</literal>), then
+ <varname>SHEBANG_LANG</varname>,
<varname>lua_OLD_CMD</varname> and
- <varname>lua_CMD</varname>.</entry>
+ <varname>lua_CMD</varname>. For example
+ <literal>SHEBANG_LANG=lua</literal>, then
+ <varname>lua_OLD_CMD=/usr/bin/lua</varname> and
+ <varname>lua_CMD=${LOCALBASE}/bin/lua</varname>.</entry>
</row>
<row xml:id="uses-tar">
<entry><literal>tar</literal></entry>
- <entry>(none), <literal>Z</literal>,
+ <entry>(none), <literal>Z</literal>, <literal>bz2</literal>,
<literal>bzip2</literal>, <literal>lzma</literal>,
- <literal>tbz</literal>, <literal>tgz</literal>,
+ <literal>tbz</literal>, <literal>tgz</literal>, <literal>txz</literal>,
<literal>xz</literal></entry>
<entry>Set <varname>EXTRACT_SUFX</varname> to
<literal>.tar</literal>, <literal>.tar.Z</literal>,
- <literal>.tar.bz2</literal>, <literal>.tar.lzma</literal>,
- <literal>.tbz</literal>, <literal>.tgz</literal> or
+ <literal>.tar.bz2</literal>, <literal>.tar.bz2</literal>, <literal>.tar.lzma</literal>,
+ <literal>.tbz</literal>, <literal>.tgz</literal>, <literal>.txz</literal> or
<literal>.tar.xz</literal> respectively.</entry>
</row>
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/svn-doc-all
To unsubscribe, send any mail to "[email protected]"