svn commit: r46030 - head/en_US.ISO8859-1/books/handbook/advanced-networking
Warren Block <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.cvs.doc |
|---|---|
| Message-ID | <[email protected]> |
Author: wblock
Date: Tue Nov 25 22:47:39 2014
New Revision: 46030
URL: https://svnweb.freebsd.org/changeset/doc/46030
Log:
Whitespace-only fixes, translators please ignore.
Modified:
head/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.xml
Modified: head/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.xml
==============================================================================
--- head/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.xml Tue Nov 25 20:44:54 2014 (r46029)
+++ head/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.xml Tue Nov 25 22:47:39 2014 (r46030)
@@ -725,8 +725,9 @@ route_net2="-net 192.168.1.0/24 192.168.
<procedure>
<step>
<para>Obtain the <acronym>SSID</acronym> (Service Set
- Identifier) and <acronym>PSK</acronym> (Pre-Shared Key) for
- the wireless network from the network administrator.</para>
+ Identifier) and <acronym>PSK</acronym> (Pre-Shared Key)
+ for the wireless network from the network
+ administrator.</para>
</step>
<step>
@@ -2253,7 +2254,8 @@ freebsdap 00:11:95:c3:0d:ac 1
<itemizedlist>
<listitem>
- <para>&android; devices generally use the &man.urndis.4; driver.</para>
+ <para>&android; devices generally use the &man.urndis.4;
+ driver.</para>
</listitem>
<listitem>
@@ -2261,7 +2263,8 @@ freebsdap 00:11:95:c3:0d:ac 1
</listitem>
<listitem>
- <para>Older devices will often use the &man.cdce.4; driver.</para>
+ <para>Older devices will often use the &man.cdce.4;
+ driver.</para>
</listitem>
</itemizedlist>
@@ -2931,12 +2934,12 @@ cu -l $PTS</programlisting>
</authorgroup>
</info>
- <indexterm>
- <primary><acronym>IP</acronym> subnet</primary>
- </indexterm>
- <indexterm>
- <primary>bridge</primary>
- </indexterm>
+ <indexterm>
+ <primary><acronym>IP</acronym> subnet</primary>
+ </indexterm>
+ <indexterm>
+ <primary>bridge</primary>
+ </indexterm>
<para>It is sometimes useful to divide a network, such as an
Ethernet segment, into network segments without having to
@@ -3833,21 +3836,22 @@ ifconfig_<literal>lagg<replaceable>0</re
<sect2 xml:id="network-pxe-nfs">
<info>
- <title>Setting Up the <acronym>PXE</acronym> Environment</title>
+ <title>Setting Up the <acronym>PXE</acronym>
+ Environment</title>
- <authorgroup>
- <author>
- <personname>
- <firstname>Craig</firstname>
- <surname>Rodrigues</surname>
- </personname>
- <affiliation>
- <address>[email protected]</address>
- </affiliation>
- <contrib>Written by </contrib>
- </author>
- </authorgroup>
- </info>
+ <authorgroup>
+ <author>
+ <personname>
+ <firstname>Craig</firstname>
+ <surname>Rodrigues</surname>
+ </personname>
+ <affiliation>
+ <address>[email protected]</address>
+ </affiliation>
+ <contrib>Written by </contrib>
+ </author>
+ </authorgroup>
+ </info>
<para>The steps shown in this section configure the built-in
<acronym>NFS</acronym> and <acronym>TFTP</acronym> servers.
@@ -4057,16 +4061,16 @@ Received 264951 bytes in 0.1 seconds</sc
}</programlisting>
- <!--
+<!--
This option still needed?
host corbieres {
- <para>This option tells <application>dhcpd</application>
- to send the value in the <literal>host</literal>
- declarations as the hostname for the diskless host.
- An alternate way would be to add an <literal>option
- host-name <replaceable>corbieres</replaceable></literal>
- inside the <literal>host</literal> declarations.</para>
- -->
+ <para>This option tells <application>dhcpd</application>
+ to send the value in the <literal>host</literal>
+ declarations as the hostname for the diskless host.
+ An alternate way would be to add an <literal>option
+ host-name <replaceable>corbieres</replaceable></literal>
+ inside the <literal>host</literal> declarations.</para>
+-->
<para>The <literal>next-server</literal> directive is used to
specify the <acronym>IP</acronym> address of the
@@ -4092,121 +4096,122 @@ Received 264951 bytes in 0.1 seconds</sc
</sect2>
<!--
Are these sections still needed?
- <sect2>
- <title>Preparing the Root File System</title>
+ <sect2>
+ <title>Preparing the Root File System</title>
- <indexterm>
- <primary>diskless operation</primary>
- <secondary>kernel configuration</secondary>
- </indexterm>
+ <indexterm>
+ <primary>diskless operation</primary>
+ <secondary>kernel configuration</secondary>
+ </indexterm>
- <para>When using <acronym>PXE</acronym>, building a custom
- kernel with the following options is not strictly necessary.
- These options cause more <acronym>DHCP</acronym> requests
- to be issued during kernel startup, with a small risk of
- inconsistency between the new values and those retrieved
- by &man.pxeboot.8; in some special cases. The advantage
- is that the host name will be set. Otherwise, set the
- host name in a client-specific
- <filename>/etc/rc.conf</filename>.</para>
+ <para>When using <acronym>PXE</acronym>, building a custom
+ kernel with the following options is not strictly necessary.
+ These options cause more <acronym>DHCP</acronym> requests
+ to be issued during kernel startup, with a small risk of
+ inconsistency between the new values and those retrieved
+ by &man.pxeboot.8; in some special cases. The advantage
+ is that the host name will be set. Otherwise, set the
+ host name in a client-specific
+ <filename>/etc/rc.conf</filename>.</para>
- <programlisting>options BOOTP # Use BOOTP to obtain IP address/hostname
+ <programlisting>options BOOTP # Use BOOTP to obtain IP address/hostname
options BOOTP_NFSROOT # NFS mount root file system using BOOTP info</programlisting>
- <para>The custom kernel can also include
- <literal>BOOTP_NFSV3</literal>,
- <literal>BOOT_COMPAT</literal> and
- <literal>BOOTP_WIRED_TO</literal>. Refer to
- <filename>NOTES</filename> for descriptions of these
- options.</para>
-
- <para>These option names are historical and slightly
- misleading as they actually enable indifferent use of
- <acronym>DHCP</acronym> and <acronym>BOOTP</acronym>
- inside the kernel.</para>
-
- <para>Build the custom kernel, using the instructions in
- <xref linkend="kernelconfig"/>, and copy it to the place
- specified in
- <filename>/usr/local/etc/dhcpd.conf</filename>.</para>
+ <para>The custom kernel can also include
+ <literal>BOOTP_NFSV3</literal>,
+ <literal>BOOT_COMPAT</literal> and
+ <literal>BOOTP_WIRED_TO</literal>. Refer to
+ <filename>NOTES</filename> for descriptions of these
+ options.</para>
+
+ <para>These option names are historical and slightly
+ misleading as they actually enable indifferent use of
+ <acronym>DHCP</acronym> and <acronym>BOOTP</acronym>
+ inside the kernel.</para>
+
+ <para>Build the custom kernel, using the instructions in
+ <xref linkend="kernelconfig"/>, and copy it to the place
+ specified in
+ <filename>/usr/local/etc/dhcpd.conf</filename>.</para>
- <indexterm>
- <primary>root file system</primary>
- <secondary>diskless operation</secondary>
- </indexterm>
+ <indexterm>
+ <primary>root file system</primary>
+ <secondary>diskless operation</secondary>
+ </indexterm>
+
+ <para>Create a root file system for the diskless
+ workstations in the location listed as
+ <literal>root-path</literal> in
+ <filename>/usr/local/etc/dhcpd.conf</filename>.</para>
- <para>Create a root file system for the diskless
- workstations in the location listed as
- <literal>root-path</literal> in
- <filename>/usr/local/etc/dhcpd.conf</filename>.</para>
-
- <para>Using <command>make world</command> to populate root is
- quick and will install a complete virgin system, not just
- the root file system, into <envar>DESTDIR</envar>. Execute
- the following script:</para>
+ <para>Using <command>make world</command> to populate root is
+ quick and will install a complete virgin system, not just
+ the root file system, into <envar>DESTDIR</envar>. Execute
+ the following script:</para>
- <programlisting>#!/bin/sh
+ <programlisting>#!/bin/sh
export DESTDIR=/data/misc/diskless
mkdir -p ${DESTDIR}
cd /usr/src; make buildworld && make buildkernel
make installworld && make installkernel
cd /usr/src/etc; make distribution</programlisting>
- <para>Once done, customize
- <filename>/etc/rc.conf</filename> and
- <filename>/etc/fstab</filename> placed into
- <envar>DESTDIR</envar> according to the system's
- requirements.</para>
- </sect2>
-
- <sect2>
- <title>Configuring Swap</title>
-
- <para>If needed, a swap file located on the server can be
- accessed via <acronym>NFS</acronym>.</para>
-
- <para>The kernel does not support enabling
- <acronym>NFS</acronym> swap at boot time. Swap must be
- enabled by the startup scripts, by mounting a writable
- file system and creating and enabling a swap file. To
- create a swap file:</para>
+ <para>Once done, customize
+ <filename>/etc/rc.conf</filename> and
+ <filename>/etc/fstab</filename> placed into
+ <envar>DESTDIR</envar> according to the system's
+ requirements.</para>
+ </sect2>
- <screen>&prompt.root; <userinput>dd if=/dev/zero of=<replaceable>/path/to/swapfile</replaceable> bs=1k count=1 oseek=<replaceable>100000</replaceable></userinput></screen>
+ <sect2>
+ <title>Configuring Swap</title>
- <para>To enable the swap file, add the following line to
- <filename>/etc/rc.conf</filename>:</para>
+ <para>If needed, a swap file located on the server can be
+ accessed via <acronym>NFS</acronym>.</para>
+
+ <para>The kernel does not support enabling
+ <acronym>NFS</acronym> swap at boot time. Swap must be
+ enabled by the startup scripts, by mounting a writable
+ file system and creating and enabling a swap file. To
+ create a swap file:</para>
+
+ <screen>&prompt.root; <userinput>dd if=/dev/zero of=<replaceable>/path/to/swapfile</replaceable> bs=1k count=1 oseek=<replaceable>100000</replaceable></userinput></screen>
+
+ <para>To enable the swap file, add the following line to
+ <filename>/etc/rc.conf</filename>:</para>
- <programlisting>swapfile=<replaceable>/path/to/swapfile</replaceable></programlisting>
- </sect2>
+ <programlisting>swapfile=<replaceable>/path/to/swapfile</replaceable></programlisting>
+ </sect2>
+
+ <sect2>
+ <title>Miscellaneous Issues</title>
- <sect2>
- <title>Miscellaneous Issues</title>
+ <indexterm>
+ <primary>diskless operation</primary>
+ <secondary>/usr read-only</secondary>
+ </indexterm>
- <indexterm>
- <primary>diskless operation</primary>
- <secondary>/usr read-only</secondary>
- </indexterm>
-
- <para>If the diskless workstation is configured to run
- <application>&xorg;</application> and is running with a read-only <filename>/usr</filename>, adjust the
- <application>XDM</application> configuration file as it
- puts the error log on <filename>/usr</filename> by
- default.</para>
-
- <para>When the server for the root file system is not
- running &os;, create the root file system on a &os;
- machine, then copy it to its destination, using
- &man.tar.1; or &man.cpio.1;.</para>
-
- <para>In this situation, there are sometimes problems with
- the special files in <filename>/dev</filename>, due to
- differing major/minor integer sizes. A solution to this
- problem is to export a directory from the non-&os; server,
- mount this directory onto a &os; machine, and use
- &man.devfs.5; to allocate device nodes transparently for
- the user.</para>
+ <para>If the diskless workstation is configured to run
+ <application>&xorg;</application> and is running with a
+ read-only <filename>/usr</filename>, adjust the
+ <application>XDM</application> configuration file as it puts
+ the error log on <filename>/usr</filename> by
+ default.</para>
+
+ <para>When the server for the root file system is not
+ running &os;, create the root file system on a &os;
+ machine, then copy it to its destination, using
+ &man.tar.1; or &man.cpio.1;.</para>
+
+ <para>In this situation, there are sometimes problems with
+ the special files in <filename>/dev</filename>, due to
+ differing major/minor integer sizes. A solution to this
+ problem is to export a directory from the non-&os; server,
+ mount this directory onto a &os; machine, and use
+ &man.devfs.5; to allocate device nodes transparently for
+ the user.</para>
</sect2>
- -->
+-->
<sect2>
<title>Debugging <acronym>PXE</acronym> Problems</title>
@@ -5191,7 +5196,7 @@ ifconfig_carp0="vhid <replaceable>1</rep
ifconfig_carp1="vhid <replaceable>2</replaceable> advskew <replaceable>100</replaceable> pass <replaceable>testpass</replaceable> <replaceable>192.168.1.51/24</replaceable>"</programlisting>
<note>
- <para>Preemption is disabled in the GENERIC &os; kernel. If
+ <para>Preemption is disabled in the GENERIC &os; kernel. If
preemption has been enabled with a custom kernel,
<systemitem>hostc.example.org</systemitem> may not release
the <acronym>IP</acronym> address back to the original
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/svn-doc-all
To unsubscribe, send any mail to "[email protected]"