Re: git: ff18000da3 - main - HW Relnotes: Add nvd to template

On 11/5/25 22:57, Alexander Ziaee wrote:
> On 2025-11-05 22:10 -05:00 EST, "John Baldwin" <[email protected]> wrote:
>> On 11/5/25 18:08, Alexander Ziaee wrote:
>>> The branch main has been updated by ziaee:
>>>> URL: https://cgit.FreeBSD.org/doc/commit/?id=ff18000da31f4135af522f43beb4d0877b024fea
>>>> commit ff18000da31f4135af522f43beb4d0877b024fea
>>> Author:     Alexander Ziaee <[email protected]>
>>> AuthorDate: 2025-11-05 23:07:39 +0000
>>> Commit:     Alexander Ziaee <[email protected]>
>>> CommitDate: 2025-11-05 23:07:39 +0000
>>>>       HW Relnotes: Add nvd to template
>>> ---
>>>    website/archetypes/release/hardware.adoc | 2 ++
>>>    1 file changed, 2 insertions(+)
>>>> diff --git a/website/archetypes/release/hardware.adoc b/website/archetypes/release/hardware.adoc
>>> index 0a9026c2fd..304641abd1 100644
>>> --- a/website/archetypes/release/hardware.adoc
>>> +++ b/website/archetypes/release/hardware.adoc
>>> @@ -312,6 +312,8 @@ EISA adapters are not supported.
>>>    >   &hwlist.nda;
>>>    > +&hwlist.nvd;
>>> +
>>>    &hwlist.ocs_fc;
>>
>> Hmm, it's not clear to me that nda/nvd are really hardware devices so much as software
>> drivers layered on top of a hardware abstraction (NVMe namespaces).  We wouldn't list
>> vlan(4) support as a distinct hardware feature in a list of NIC devices, and I feel
>> like listing da(4) or pass(4) or nda(4) or nvd(4) is similar to vlan(4).  In particular,
>> you can't hold an nda(4) or vlan(4) (or wlan(4)) in your hand the way you can hold an
>> M.2 NVMe device, or a NIC.  I think for the hardware notes, what people are interested
>> in is which pieces of hardware will work, not necessarily the software abstractions we
>> layer on top of them.
>>
>> Similarly, you wouldn't list mfid(4) for the logical RAID volumes on an mfi(4) controller,
>> just that we support mfi(4) controllers.  The fact that you can access the RAID volumes
>> exported by such a controller is implied by supporting the controller.
> 
> Well, yes, but before I added these, searching the page for a "nvme" only showed ahci bridges and raid controllers.

I think that means we need a suitable section in nvme.4 so we can use &hwlist.nvme then?
Having both nvd and nda listed back to back seems a bit redundant vs having a good
description for nvme(4) that says it supports PCIe NVMe devices I think?

-- 
John Baldwin