git: aa29975e70 - main - 14.4/hardware: Strip backslashes

The branch main has been updated by ziaee:

URL: https://cgit.FreeBSD.org/doc/commit/?id=aa29975e70315b9c9b43ec5ee7d3aff7464331a2

commit aa29975e70315b9c9b43ec5ee7d3aff7464331a2
Author:     Alexander Ziaee <[email protected]>
AuthorDate: 2026-03-09 19:15:26 +0000
Commit:     Alexander Ziaee <[email protected]>
CommitDate: 2026-03-09 19:15:26 +0000

    14.4/hardware: Strip backslashes
    
    We never did figure out how these get in here.
---
 website/content/en/releases/14.4R/hardware.adoc | 74 ++++++++++++-------------
 1 file changed, 37 insertions(+), 37 deletions(-)

diff --git a/website/content/en/releases/14.4R/hardware.adoc b/website/content/en/releases/14.4R/hardware.adoc
index cf053784b5..e09fd10850 100644
--- a/website/content/en/releases/14.4R/hardware.adoc
+++ b/website/content/en/releases/14.4R/hardware.adoc
@@ -1131,7 +1131,7 @@ ATAPI and non-DMA ATA commands executed one by one for each port.
 
 
 The
-**ocs\_fc**
+**ocs_fc**
 driver supports these Fibre Channel adapters:
 
 Emulex 16/8G FC GEN 5 HBAS
@@ -1361,7 +1361,7 @@ The
 driver supports the following USB Fast Ethernet adapters based on the
 ADMtek AN986 Pegasus chipset:
 
-*	Abocom UFE1000, DSB650TX\_NA
+*	Abocom UFE1000, DSB650TX_NA
 *	Accton USB320-EC, SpeedStream
 *	ADMtek AN986, AN8511
 *	Billionton USB100, USB100LP, USB100EL, USBE100
@@ -1399,10 +1399,10 @@ AX88172:
 *	Billionton SnapPort
 *	Billionton USB2AR
 *	Buffalo (Melco Inc.) LUA-U2-KTX
-*	Corega USB2\_TX
+*	Corega USB2_TX
 *	D-Link DUBE100
 *	Goodway GWUSB2E
-*	JVC MP\_PRX1
+*	JVC MP_PRX1
 *	LinkSys USB200M
 *	Netgear FA120
 *	Sitecom LN-029
@@ -2531,7 +2531,7 @@ driver automatically switches the device from
 "Zero-CD"
 mode to modem mode.
 This behavior can be disabled by setting
-*hw.usb.uhso.auto\_switch*
+*hw.usb.uhso.auto_switch*
 to 0 using
 sysctl(8).
 
@@ -2634,7 +2634,7 @@ The man:adm6996fc[4] driver supports the Infineon ADM6996FC Fast Ethernet switch
 
 
 The
-**ar40xx\_switch**
+**ar40xx_switch**
 driver supports the following Gigabit Ethernet switch controllers:
 
 *	Qualcomm IPQ 4019 Five-port Gigabit Ethernet Switch
@@ -2719,7 +2719,7 @@ except those that are based on the AR5005VL chipset.
 
 
 The following cards are among those supported by the
-**ath\_hal**
+**ath_hal**
 module:
 
 	*Card*               Chip      Bus        Standard  
@@ -3165,7 +3165,7 @@ driver supports PCIe devices with the following chipsets:
 
 
 The
-**rtwn\_pci**
+**rtwn_pci**
 driver supports the following PCIe Wi-Fi devices:
 
 *	Realtek 802.11n wireless 8188  (RTL8188EE)
@@ -3174,7 +3174,7 @@ driver supports the following PCIe Wi-Fi devices:
 
 
 The
-**rtwn\_usb**
+**rtwn_usb**
 driver supports USB wireless network adapters based on certain
 Realtek RTL 8188/8192/8812 and 8821 chipsets, including:
 
@@ -4136,7 +4136,7 @@ driver supports the following adapters:
 
 
 The
-**snd\_als4000**
+**snd_als4000**
 driver supports the following sound cards:
 
 *	Avance Logic ALS4000
@@ -4144,7 +4144,7 @@ driver supports the following sound cards:
 
 
 The
-**snd\_atiixp**
+**snd_atiixp**
 driver supports the following audio chipsets:
 
 *	ATI IXP 200
@@ -4154,7 +4154,7 @@ driver supports the following audio chipsets:
 
 
 The
-**snd\_cmi**
+**snd_cmi**
 driver supports the following sound cards:
 
 *	CMedia CMI8338A
@@ -4165,7 +4165,7 @@ driver supports the following sound cards:
 
 
 The
-**snd\_cs4281**
+**snd_cs4281**
 driver supports the following sound cards:
 
 *	Crystal Semiconductor CS4281
@@ -4173,7 +4173,7 @@ driver supports the following sound cards:
 
 
 The
-**snd\_csa**
+**snd_csa**
 driver supports the following sound cards:
 
 *	Crystal Semiconductor CS4280
@@ -4192,13 +4192,13 @@ Some onboard CS4610 chips are accompanied by the CS423x ISA codec
 instead of the CS4297 AC97 codec.
 Such configurations are not
 supported by the
-**snd\_csa**
+**snd_csa**
 driver yet.
 
 
 
 The
-**snd\_emu10k1**
+**snd_emu10k1**
 driver supports the following sound cards:
 
 *	Creative SoundBlaster Live! (EMU10K1 Chipset)
@@ -4209,7 +4209,7 @@ driver supports the following sound cards:
 
 
 The
-**snd\_emu10kx**
+**snd_emu10kx**
 driver supports the following sound cards:
 
 *	Creative Sound Blaster Live! (EMU10K1 Chipset).
@@ -4226,7 +4226,7 @@ driver supports the following sound cards:
 	There is no MIDI support for this card.
 
 The
-**snd\_emu10kx**
+**snd_emu10kx**
 driver does
 *not*
 support the following sound cards (although they have names
@@ -4246,7 +4246,7 @@ similar to some supported ones):
 
 
 The
-**snd\_envy24**
+**snd_envy24**
 driver supports the following audio devices:
 
 *	M-Audio Audiophile 2496
@@ -4259,7 +4259,7 @@ Recording and other features of these cards are not supported.
 
 
 The
-**snd\_envy24ht**
+**snd_envy24ht**
 driver supports the following audio devices:
 
 *	Audiotrak Prodigy 7.1
@@ -4283,7 +4283,7 @@ Recording and other features of these cards are not supported.
 
 
 The
-**snd\_es137x**
+**snd_es137x**
 driver supports the following sound cards:
 
 *	Creative CT5880-A
@@ -4301,7 +4301,7 @@ driver supports the following sound cards:
 
 
 The
-**snd\_fm801**
+**snd_fm801**
 driver supports audio devices based on the following chipset:
 
 *	Forte Media FM801
@@ -4309,7 +4309,7 @@ driver supports audio devices based on the following chipset:
 
 
 The
-**snd\_hda**
+**snd_hda**
 driver supports PCI class 04h
 (multimedia),
 subclass 03h
@@ -4320,7 +4320,7 @@ Intel High Definition Audio 1.0 specification.
 
 
 The
-**snd\_hdspe**
+**snd_hdspe**
 driver supports the following audio devices:
 
 *	RME HDSPe AIO
@@ -4336,7 +4336,7 @@ be mapped to ADAT channels and vice versa.
 
 
 The
-**snd\_ich**
+**snd_ich**
 driver supports the following audio devices:
 
 *	AMD 768
@@ -4361,7 +4361,7 @@ driver supports the following audio devices:
 
 
 The
-**snd\_maestro3**
+**snd_maestro3**
 driver supports the following audio devices:
 
 *	ESS Technology Allegro-1
@@ -4370,7 +4370,7 @@ driver supports the following audio devices:
 
 
 The
-**snd\_neomagic**
+**snd_neomagic**
 driver supports the following audio devices:
 
 *	NeoMagic 256AV
@@ -4379,7 +4379,7 @@ driver supports the following audio devices:
 
 
 The
-**snd\_solo**
+**snd_solo**
 driver supports the following sound cards:
 
 *	ESS Solo-1 (ES1938 Chipset)
@@ -4388,7 +4388,7 @@ driver supports the following sound cards:
 
 
 The
-**snd\_spicds**
+**snd_spicds**
 driver supports the following codecs:
 
 *	AK4358
@@ -4401,7 +4401,7 @@ driver supports the following codecs:
 
 
 The
-**snd\_t4dwave**
+**snd_t4dwave**
 driver supports the following audio devices:
 
 *	Acer Labs M5451
@@ -4413,7 +4413,7 @@ driver supports the following audio devices:
 
 
 The
-**snd\_via8233**
+**snd_via8233**
 driver supports the following audio chipsets:
 
 *	VIA VT8233
@@ -4426,7 +4426,7 @@ driver supports the following audio chipsets:
 
 
 The
-**snd\_via82c686**
+**snd_via82c686**
 driver supports audio devices based on the following chipset:
 
 *	VIA 82C686A
@@ -4434,7 +4434,7 @@ driver supports audio devices based on the following chipset:
 
 
 The
-**snd\_vibes**
+**snd_vibes**
 driver supports audio devices based on the following chipset:
 
 *	S3 SonicVibes
@@ -4730,7 +4730,7 @@ The driver supports the following IEEE 1394 OHCI chipsets:
 
 
 The
-**ng\_ubt**
+**ng_ubt**
 driver supports all Bluetooth USB devices that conform with
 the Bluetooth specification v1.1, including:
 
@@ -4998,14 +4998,14 @@ driver provides support for the following devices:
 
 
 The current version of the
-**netfpga10g\_nf10bmac**
+**netfpga10g_nf10bmac**
 driver works with one PIO mode interface of the
 NetFPGA-10G Embedded CPU Ethernet Core version 1.00a.
 
 
 
 The following PLX/Avago/Broadcom chips are supported by the
-**ntb\_hw\_plx**
+**ntb_hw_plx**
 driver:
 
 *	PEX 8713
@@ -5019,7 +5019,7 @@ driver:
 
 
 These temperature sensors are supported by the
-**ow\_temp**
+**ow_temp**
 driver:
 
 DS1820