problem compiling /usr/ports/databases/postgresql7

Hi list, I've looked through the archives and google and have not
found anything relating to this issue.  When I attempt to compile
/usr/ports/databases/postgresql7 from ports it fails with what looks
like an error while trying to compile a preproc file.


System is a sun ultra5:

%uname -r
5.3-STABLE
%

here is the error message:

gmake[4]: Leaving directory
`/usr/ports/databases/postgresql7/work/postgresql-7.4.6/src/interfaces/ecpg/ecpglib'
gmake -C compatlib all
gmake[4]: Entering directory
`/usr/ports/databases/postgresql7/work/postgresql-7.4.6/src/interfaces/ecpg/compatlib'
cc -O2 -pipe  -fno-strict-aliasing -Wall -Wmissing-prototypes
-Wmissing-declarations -fpic -DPIC
-I../../../../src/interfaces/ecpg/include -I../../.
./../src/interfaces/libpq -I../../../../src/include/utils
-I../../../../src/include -I/usr/local/include   -c -o informix.o
informix.c
ar cr libecpg_compat.a `lorder informix.o | tsort`
ranlib libecpg_compat.a
cc -O2 -pipe  -fno-strict-aliasing -Wall -Wmissing-prototypes
-Wmissing-declarations -fpic -DPIC -shared
-Wl,-x,-soname,libecpg_compat.so.1 informix
.o -L../../../../src/port -L/usr/local/lib -L../ecpglib -lecpg
-L../pgtypeslib -lpgtypes -L../../../../src/interfaces/libpq -lpq
-lintl -lssl -lcryp
to -lcrypt -lm  -R/usr/local/lib -o libecpg_compat.so.1
rm -f libecpg_compat.so
ln -s libecpg_compat.so.1 libecpg_compat.so
gmake[4]: Leaving directory
`/usr/ports/databases/postgresql7/work/postgresql-7.4.6/src/interfaces/ecpg/compatlib'
gmake -C preproc all
gmake[4]: Entering directory
`/usr/ports/databases/postgresql7/work/postgresql-7.4.6/src/interfaces/ecpg/preproc'
gmake -C ../../../../src/port all
gmake[5]: Entering directory
`/usr/ports/databases/postgresql7/work/postgresql-7.4.6/src/port'
gmake[5]: Nothing to be done for `all'.
gmake[5]: Leaving directory
`/usr/ports/databases/postgresql7/work/postgresql-7.4.6/src/port'
cc -O2 -pipe  -fno-strict-aliasing -Wall -Wmissing-prototypes
-Wmissing-declarations -Wno-error -I./../include -I.
-I../../../../src/include -I/usr/
local/include  -DMAJOR_VERSION=3 -DMINOR_VERSION=1 -DPATCHLEVEL=1
-DINCLUDEDIR=\"/usr/local/include\"
-DPKGINCLUDEDIR=\"/usr/local/include/postgresq
l\"   -c -o preproc.o preproc.c
In file included from preproc.y:6331:
pgc.c: In function `yylex':
pgc.c:1440: warning: label `find_rule' defined but not used
cc: {standard input}: Assembler messages:
{standard input}:123489: Warning: end of file not at end of a line;
newline inserted
Internal error: Killed (program cc1)
Please submit a full bug report.
See <URL:http://gcc.gnu.org/bugs.html> for instructions.
gmake[4]: *** [preproc.o] Error 1
gmake[4]: *** Deleting file `preproc.o'
gmake[4]: Leaving directory
`/usr/ports/databases/postgresql7/work/postgresql-7.4.6/src/interfaces/ecpg/preproc'
gmake[3]: *** [all] Error 2
gmake[3]: Leaving directory
`/usr/ports/databases/postgresql7/work/postgresql-7.4.6/src/interfaces/ecpg'
gmake[2]: *** [all] Error 2
gmake[2]: Leaving directory
`/usr/ports/databases/postgresql7/work/postgresql-7.4.6/src/interfaces'
gmake[1]: *** [all] Error 2
gmake[1]: Leaving directory
`/usr/ports/databases/postgresql7/work/postgresql-7.4.6/src'
gmake: *** [all] Error 2
*** Error code 2


I am not sure if this enough information, i can post the script(1)
file I created when I began the make if neccessary.  Also for
completeness here is a dmesg:



%dmesg
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...2 1 1 1 0 1 0 0 done
No buffers busy after final sync
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #0: Mon Nov 22 09:49:12 PST 2004
    [email protected]:/usr/obj/usr/src/sys/SUN
Timecounter "tick" frequency 360000000 Hz quality 1000
real memory  = 134217728 (128 MB)
avail memory = 120963072 (115 MB)
cpu0: Sun Microsystems UltraSparc-IIi Processor (360.00 MHz CPU)
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff
pci0: <OFW PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pci1: <OFW PCI bus> on pcib1
ebus0: <PCI-EBus2 bridge> mem
0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 1.0 on pci1
ebus0: <auxio> addr
0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003
(no driver attached)
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
sab0: <Siemens SAB 82532 v3.2> addr 0x1400400000-0x140040007f irq 43 on ebus0
sab0: [FAST]
sabtty0: <ttya> on sab0
sabtty1: <ttyb> on sab0
ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached)
ebus0: <su> addr 0x14003062f8-0x14003062ff irq 42 (no driver attached)
ebus0: <ecpp> addr
0x1400700000-0x140070000f,0x140030015c-0x140030015d,0x14003043bc-0x14003043cb
irq 34 (no driver attached)
ebus0: <fdthree> addr
0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7
irq 39 (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 80cff1dd
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,CS4231> addr
0x1400722000-0x1400722003,0x1400704000-0x140070400f,0x1400702000-0x140070200f,0x1400200000-0x14002000ff
irq 36,35 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on pci1
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: 08:00:20:cf:f1:dd
hme0: if_start running deferred for Giant
hme0: [GIANT-LOCKED]
pci1: <display, VGA> at device 2.0 (no driver attached)
atapci0: <CMD 646 WDMA2 controller> port
0xc00020-0xc0002f,0xc00018-0xc0001b,0xc00010-0xc00017,0xc00008-0xc0000b,0xc00000-0xc00007
at device 3.0 on pci1
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
pci2: <OFW PCI bus> on pcib2
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x400-0x4ff mem
0x2000-0x2fff at device 1.0 on pci2
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
Timecounters tick every 10.000 msec
ad0: 114473MB <ST3120026A/8.54> [232581/16/63] at ata2-master WDMA2
acd0: CDRW <CRD-8322B/1.05> at ata3-master PIO4
Waiting 10 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0a


cheers,
     -pete




-- 
~~o0OO0o~~
Pete Wright
www.nycbug.org
NYC's *BSD User Group
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-database
To unsubscribe, send any mail to "[email protected]"