Re: kern/97208: [firewire] System hangs / locks up when a firewire disk is attached
Torfinn Ingolfsen <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.firewire |
|---|---|
| Message-ID | <[email protected]> |
On Sun, 08 Feb 2009 14:07:19 -0800 Sean Bruno <[email protected]> wrote: > I will backport a patch to allow CAM to see a drive connect/disconnect > better this week. Right now, I think you have to reboot if the > initial connection fails. It's kind of awful. Well for me, the drive itself _never_ attaches properly. > I noted that there are 2 models of the Maxtor OneTouch II. It appears > from the fwcontrol output that you have a FW800 adapter in your PC and > that the Maxtor is using a FW800 port. Does the FW400 port work? > Does the USB port work? I am using this motherboard[1]. The TI chipset on the mb is FW-800. All fw ports are equal, ie. there are no fw400-only ports. Yes, the usb port on the dive works (as reported initially). > I am puzzled by the fact that "stuff" appears to be happening WAY > before a busreset occurs. This seems bad. I agree, it seems bad. :-) > Try the same test, but execute a "fwcontrol -r" to force a bus reset. I'll try this another day (the box is busy now, recording). > I'd be interested to see the same output from your console with > debugging enabled. The output you got already _is_ with debugging enabled (ie those two sysctls you asked for). > You appear to have 2 ports connected to FW800 devices, port 0 and port > 2. What is on both ports? Well that's wrong. Therer is only one thing connected to firewire ports when the test was performed: the Maxtor drive. Does the controler count as one port? References: 1) http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID=1860 -- Regards, Torfinn Ingolfsen _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-firewire To unsubscribe, send any mail to "[email protected]"