Re: firewire disk stopped working

Boris Kotzev <[email protected]>
Newsgroups gmane.os.freebsd.devel.firewire
Organization Home
Message-ID <[email protected]>
On четвъртък 19 февруари 2009 06:52:32 you wrote:
> On Thu, 2009-02-19 at 03:12 +0200, Boris Kotzev wrote:
> > On сряда 18 февруари 2009 21:26:31 you wrote:
> > > On Sun, 2009-02-15 at 17:27 +0200, Boris Kotzev wrote:
> > > > On неделя 15 февруари 2009 01:12:40 you wrote:
> > > > > If you haven't already, boot back into the previous kernel
> > > > > environment and let me know what revision of CURRENT it was that
> > > > > worked.
> > > > >
> > > > > Then I'll need to know what version you were using that broke.
> > > > >
> > > > > I'm trying to get my AMD64 system built this weekend to test
> > > > > things.
> > > > >
> > > > > Sean
> > > >
> > > > Verbose dmesg from the working system:
> > > >
> > > > http://host7.net62.hdsl-213-169.fastbg.net/dmesg.working.txt
> > > >
> > > > Verbose dmesg from the broken system:
> > > >
> > > > http://host7.net62.hdsl-213-169.fastbg.net/dmesg.broken.txt
> > > >
> > > > (The cable was plugged in after the system had had already booted -
> > > > the output from the disk is found at the end.)
> > > >
> > > > Please, feel free to ask for more details, if necessary.
> > > >
> > > > Thanks,
> > > >
> > > > Boris Kotzev
> > >
> > > Looking over your logs, I can't quite see what the failure is.  There
> > > seems to be a format error, I'm just not sure what is being requested.
> > >
> > > Can you update to -current, and set:
> > > debug.sbp_debug = 1
> > > debug.firewire_debug = 1
> > >
> > > Then repost your dmesg.
> > >
> > > Sean
> >
> > Hi,
> >
> > The dmesg output after plugging the cable are as follows (full verbose
> > dmesg can be found at
> > http://host7.net62.hdsl-213-169.fastbg.net/dmesg.debug.txt ):
>
> I went over everything and came up with the following patch.  Let me
> apply this to -current and let me know if it makes any difference.
>
> Sean

Hi,

No, unfortunately the patch did not help. The new dmesg output after plugging the cable follows below.
(After unplugging the cable the system prints this on the screen:
http://host7.net62.hdsl-213-169.fastbg.net/messages.jpg
and then freezes completely.)

fwohci0: fwohci_intr_core: BUS reset
sbp_post_busreset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=3, non CYCLEMASTER mode
node:0 link:1 gap:5 spd:2 con:1 pwr:0 p0:2 p1:1 p2:1 i:1 m:0
node:1 link:1 gap:63 spd:2 con:0 pwr:4 p0:1 p1:3 p2:0 i:0 m:0
firewire0: 2 nodes, maxhop <= 1 cable IRM irm(0)  (me) 
fwohci0: fwohci_set_bus_manager: 0->0 (loop=0)
firewire0: root node is not cycle master capable
firewire0: bus manager 0 
firewire0: fw_phy_config: root_node=0 gap_count=5
fwohci0: start AT DMA status=11
fwohci0: too many cycle lost, no cycle master presents?
firewire0: fw_bus_probe:iterate and invalidate all nodes
firewire0: fw_explore:found myself node(0) fc->nodeid(0) fc->max_node(1)
firewire0: fw_explore:node(1) fc->max_node(1) found
firewire0: fw_explore_node: node(1) BUS INFO BLOCK:
irmc(0) cmc(0) isc(0) bmc(0) pmc(0) cyc_clk_acc(255) max_rec(5) max_rom(1) generation(1) link_spd(2)
fwohci0: txd err= 3 miss Ack err
fwohci0: txd err= 3 miss Ack err
firewire0: fw_explore_node: fwdev->speed(S100) set lower than binfo->link_spd(S400)
firewire0: New S100 device ID:0020370004a03421
firewire0: fw_explore: node 2, err = 0
bus_explore done
sbp_post_explore (sbp_cold=1)
sbp0: sbp_post_explore:: EUI:0020370004a03421  attached, state=2
target 0 lun 0 found
sbp0: sbp_show_sdev_info: sbp0:0:0: ordered:1 type:0 EUI:0020370004a03421 node:1 speed:0 maxrec:0
sbp0: sbp_show_sdev_info: sbp0:0:0 'Seagate' 'ATA Device 00' '000102'
sbp_login: sec = 0 usec = 714638 ticks = 714
sbp0: sbp_mgm_orb:sbp0:0:0 LOGIN
sbp: alloc 1 xfer
fwohci0: fwohci_start: maxdesc 3
sbp0: sbp_recv1:sbp0:0:0 login: len 16, ID 0, cmd 0000fffff0100000, recon_hold 0
sbp0: sbp_busy_timeout:sbp0:0:0
sbp0: sbp_agent_reset:sbp0:0:0
sbp0: sbp_do_attach:sbp0:0:0
sbp0: sbp_cam_scan_target:sbp0:0:0
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d2c8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d418
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d568
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d6b8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d808
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d958
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2daa8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2dbf8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2dd48
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2de98
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d028
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d178
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d2c8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d418
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d568
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d6b8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d808
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d958
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2daa8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2dbf8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2dd48
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2de98
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d028
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d178
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d2c8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d418
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d568
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d6b8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d808
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d958
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2daa8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2dbf8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2dd48
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2de98
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d028
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d178
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d2c8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d418
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d568
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d6b8
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command
sbp0: sbp_recv1:sbp0:0:0 ORB status src:1 resp:1 dead:1 len:3 stat:4e orb:004c2d808
sbp0: sbp0:0:0
Obj: Data buffer, Error: Type error
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 00 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0: SCSI status 0 sfmt 0 valid 0 key 0 code 0 qlfr 0 len 3
sbp0: sbp_scsi_status:sbp0:0:0 unknown scsi status 0x0
sbp0: (probe0:sbp_agent_reset:sbp0:0:0sbp0:0:
0:0): Request Requeued
(probe0:sbp0:0:0:0): Retrying Command

Thanks,

Boris Kotzev

_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-firewire
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.